Remington 500V operating instructions Inserting Baffle Assembly, Replacing Advance BAR

Page 22

Tool Assembly (Cont.)

B. INSERTING BAFFLE ASSEMBLY

1.Insert baffle assembly with o-ring into handle and tighten (see Figure 15).

Housing Handle

O-Ring

Baffle Assembly

Figure 15 - Inserting Baffle Assembly

C. REPLACING ADVANCE BAR

1.Place advance bar and spring into housing (see Figure 16).

2.Secure advance bar by inserting the advance pin through the housing, advance bar, and spring.

3.Place cover onto housing and align holes. Insert screws into cover and tighten with 3mm hex wrench (see Figure 16).

Screws

Cover

Advance Pin

Advance Bar and Spring

Housing

Figure 16 - Replacing Advance Bar

D. REPLACING TRIGGER AND PAWL ASSEMBLY

1.Assemble pawl components and screw into housing using a phillips head screwdriver (see Figure 17).

2.Slide trigger into housing (see Figure 17).

Housing

Note: Spring and plate are NOT reversible. Bent arm on spring must be toward plate.

Pawl

Assembly

Trigger

Figure 17 - Replacing Trigger and Pawl Assembly

106763

22

Image 22

Contents Model Index Before Using Safety Precautions Handling the ToolPowd Load Powder Loads Know Your Fastening Base Material ? ?Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners Never use power loads in firearms Head Shank Plastic Flute WHY a Power Fastener Holds Concrete Why a Power Fastener HoldsWHY a Power Fastener Holds Steel Fastening Into Concrete Power Loads and Power Indicator SettingOverdriven Power Fasteners and Piston Fastening Into SteelOperation Water Parts List 500VCleaning and Maintenance Tool Disassembly Removing Barrel AssemblyRemoving Rear PAD and Power Indicator Assembly Removing Handle PAD AssemblyRemoving Rocker ARM Assembly Removing Trigger and Pawl Assembly Removing Firing PINRemoving Outer Liner Assembly from Housing Tool AssemblyRemoving Baffle Assembly Inserting Outer Liner AssemblyReplacing Trigger and Pawl Assembly Inserting Baffle AssemblyReplacing Advance BAR Replacing Rocker ARM Assembly Replacing Firing PINAttaching Handle PAD Assembly Attaching Rear PAD AssemblyAssembling Barrel Assembly Replacing Key Stop Troubleshooting Guide Problem Possible Cause RemedyRepair Service Replacement Parts And AccessoriesTechnical Service Warranty ServiceParts Centrals FastenersApplication Chart Power load and power fastener application information106763 106763 Limited Warranty Agreement A. only