Application Chart
Power load and power fastener application information.
|
| power fastener | power load |
For fastening this | to this | length | color |
Two by Fours | Concrete | 2 1/2" | Yellow |
| Cement Block | 2 1/2" | Yellow |
| Steel (3/16" to 3/8" Thick) | 2" | Yellow/Red |
Furring Strips | Concrete | 1 1/2" | Yellow |
| Cement Block | 1 1/2" | Yellow |
| Steel (3/16" to 3/8" Thick) | 1 1/2" | Yellow/Red |
Electrical | Concrete | 1" | Yellow |
Junction Boxes | Cement Block | 1" | Green |
| Steel (3/16" to 3/8" Thick) | 1" | Yellow/Red |
Conduit Clips | Concrete | 1" | Yellow |
| Cement Block | 1" | Green |
| Steel (3/16" to 3/8" Thick) | 1" | Yellow/Red |
Shelf Brackets | Concrete | 1" | Yellow |
| Cement Block | 1" | Green |
1/4" Plywood or | Concrete | 1 1/4" | Yellow |
Pegboard | Cement Block | 1 1/4" | Yellow |
| Steel (3/16" to 3/8" Thick) | 1 1/4" | Yellow/Red |
Power load listings are recommendations only. If you are in doubt, try a test fastening using the next lightest power load.
IMPORTANT
•Recommended for use with Remington® power load strips and power fasteners.
•If power fastener goes below the top surface of the board, use penetrating con- trol disc (* see illustration below).
•Always wear approved goggles and hearing protection.
*Use power fastener with penetration control disc, part number 015549.
.27 | CALIBER | Load |
| Color Code | ||
Level | Load | Case |
| |||
strip | loads for | Number | Strength | Body | Head | |
powder actuated |
|
|
|
| ||
3 | medium | brass | Green | |||
tools |
| |||||
| 4 | heavy | brass | Yellow | ||
|
| |||||
|
| 5 | extra heavy | brass | Red | |
|
|
|
|
|
| |