Lamp Glass

The P8 and P12 proofer / holding cabinets are fitted with 2 halogen lamps. These are fitted on the L/H inner side panel, behind the L/Hand side rack.

Interior

Lamps

a.To remove lamp glass, ensure that the L/Hand side rack is removed as shown on the prevous page.

Unscrew Anti-Clockwise

b.Unscrew the lamp glass anti-clockwise to remove.

c.Remove seal fitted between lamp glass and holder.

Remove Seal

d.Wash the lamp glass and seal using a soft sponge and warm water with a detergent solution. Rinse with clean, warm water and dry off.

e. Dry the lamp glass thoroughly with a dry cloth.

NOTE: The lamp glass seal must be fitted with the flat face of the seal towards the lamp glass.

f.To refit the lamp glass, screw in clockwise. Do not over tighten the lamp glass.

g.Refit the L/Hand side rack as shown on the prevous page.