Craftsman 706.59668, 706.59669 owner manual TOP, Wiring HARNESS, Harness Grommet, Parts Replacement

ICRAFTSMAN°I

WIRING HARNESS REPLACEMENT

HARNESS GROMMET REPLACEMENT

Tools Required:

3/8" Wrench

TOP, WIRING HARNESS, HARNESS GROMMET

Parts Replacement

Roll-away top

Harness grommet

Wiring harness

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA

F1615

WIRING HARNESS AND HARNESS

GROMMET REMOVAL

•Disconnect power from unit.

•Remove pull out work surface and enough drawers to reach the top back inside of the unit. (See drawer and work surface installation and removal.)

•Remove lock and top from roll-away. (See roll-awaytop removal and installation.)

•Remove harness grommet from roll-

away.

WIRING HARNESS REMOVAL

•For units with accent lighting under roll-away, remove bottom drawer and disconnect accent lighting.

•Remove wiring harness through hole in roll-away top.

Insert assembly into track in unit.

WIRING HARNESS AND HARNESS

GROMMET INSTALLATION

•Insert new wiring harness assembly

into mounting track through hole in top of roll-away (connector should be on top.) Slide wiring harness assembly to bottom of roll-away.

•Install harness grommet over connector. Insert into hole in top of roll-away.

•Reinstall top and lock

•If unit has accent lighting, reconnect accent lighting.

•Test lock operation.

•Reinstall drawers.

•Reconnect power to the unit.

Harness

Grommet

2