Garmin 225B, 225A manual After making a selection, press ENT, Selected Wpt Type

Page 15

5.Turn the LARGE knob to select the waypoint Type.

6.Turn the SMALL knob to select the Type from the list.

Selected Wpt Type

Figure 2-4 Com User Frequency Type Selection

Frequency Type Symbol

Description

 

 

TWR

Tower

GND

Ground

ATIS

Automatic Terminal Information Service

 

 

AWS

Automated Weather Observing System

ATF

Aerodrome Traffic Frequency

ARR

Arrival

 

 

APPR

Approach

DEP

Departure

CLR

Clearance

 

 

CTAF

Common Traffic Advisory Frequency

FSS

Flight Service Station

RFS

Remote Flight Service Station

 

 

MF

Mandatory Frequency

UNI

Unicom

 

 

Blank

None

Table 2-1 - Com Frequency Type List

7. After making a selection, press ENT.

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

2-3

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation US Toll Free Canada Toll Free Product Registration and SupportContents Index Index-1 Photo Sensor Product DescriptionPilot Controls Power/Com Volume/Squelch KnobMEM Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key Com KeyUSB Port Func Function KeyMON Monitor Key Selected Frequency Power OnCom Radio Selecting a Com FrequencyMonitor Annunciation Standby Frequency Being Monitored Monitoring the Standby Com ChannelSaving a Com Channel After selecting the desired characters, press ENTSelected Wpt Type After making a selection, press ENTCom Database Look-Up Emergency ChannelActive and Standby frequencies Airport Identifier Shown For Freqs In Database Stuck MicFrequency Database Reverse Look-Up Remote Frequency Selection ControlThis page intentionally left blank Functions Description SYS Config Com SpacingPress the Func key to access the Functions Com FrequenciesRecent Com Frequencies Press ENT Key To Delete Selected Freq Com User FrequenciesPress the CLR key to delete this User frequency Selected Frequency Select Wpt Name Select Wpt TypeSelect User Wpt Name Frequencies. Press ENTSelect User Freqs Select User Freq ValueSelected Freq As Active Com Database FrequenciesPress ENT Key To Set Selected Freq As Standby IdentifierTurn Small Knob To Scroll Through Available Airports Com Nearest Airports APTCom Nearest Area Control Center ACC Frequencies Turn the Small knob to display the available ACCs13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies14 Com Nearest Weather Frequencies Com Nearest Weather WX FrequenciesAdjust Intercom ICS ConfigurationTurn the Small knob to turn the Aux Audio On or Off Aux AudioSpeaker On/Off function. Then, press ENT Intercom On/OffSpeaker On/Off Intercom On/Off function. Then, press the ENT keySystem Configuration Com SpacingTurn the Small Knob to Select the Channel Spacing Display Brightness BrightnessSelect the Offset Value Database Version function. Then, press the ENT key Display ContrastDatabase Info Display Contrast function. Then, press the ENT keyLoad Database Load Database function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Serial Number function. Then, press ENT Software VersionSerial Number Press the Func key to return to the main menuSetting Up the Count Down Timer TimersPressing ENT twice will stop the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing CLR and then ENT will reset the displayed Timer36 Count Down Timer Value Now Counting Up Count Down Timer Value Highlighted When Counting UpThis page intentionally left blank Appendix TroubleshootingCheck Mic key input It can be enabledOr disabled via a Remote mounted If in Lock Out modeUpdating the Frequency Database Messages Radio will no longer Transmit Power has been Re-apply power to the unitSwitch has been All installationsThis input will now InstallationsIndex Stuck mic 2-5 Support
Top Page Image Contents