Garmin 225A, 225B manual Com Nearest Weather WX Frequencies, Com Nearest Weather Frequencies

Page 26

3.2.7Com Nearest Weather (WX) Frequencies

The GTR 225, when interfaced with an appropriate GPS receiver, will report the 25 nearest Weather (WX) frequencies.

Turn SMALL Knob

To Scroll Through

Available Frequencies

Figure 3-14 Com Nearest Weather Frequencies

1.Press FUNC to access the Functions. With the Com Frequency Function highlighted, turn the SMALL knob to view the Com

Nearest Weather function. Then, press ENT.

2.Turn the SMALL knob to display the available Weather frequencies.

3.Press the ENT key to insert the highlighted frequency as the Standby frequency. Or, press the CLR key to return to the

Functions display.

4.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

3-8

Garmin GTR 225/225A/225B Pilot’s Guide

190-01182-00 Rev. A

Image 26

Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation Product Registration and Support US Toll Free Canada Toll FreeContents Index Index-1 Product Description Photo SensorPower/Com Volume/Squelch Knob Pilot ControlsCom Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key MEM KeyMON Monitor Key USB PortFunc Function Key Selecting a Com Frequency Power OnCom Radio Selected FrequencyAfter selecting the desired characters, press ENT Monitoring the Standby Com ChannelSaving a Com Channel Monitor Annunciation Standby Frequency Being MonitoredAfter making a selection, press ENT Selected Wpt TypeActive and Standby frequencies Com Database Look-UpEmergency Channel Remote Frequency Selection Control Stuck MicFrequency Database Reverse Look-Up Airport Identifier Shown For Freqs In DatabaseThis page intentionally left blank SYS Config Com Spacing Functions DescriptionRecent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Selected Frequency Select Wpt Name Select Wpt Type Com User FrequenciesPress the CLR key to delete this User frequency Press ENT Key To Delete Selected FreqSelect User Freq Value Frequencies. Press ENTSelect User Freqs Select User Wpt NameIdentifier Com Database FrequenciesPress ENT Key To Set Selected Freq As Standby Selected Freq As ActiveTurn the Small knob to display the available ACCs Com Nearest Airports APTCom Nearest Area Control Center ACC Frequencies Turn Small Knob To Scroll Through Available AirportsCom Nearest Flight Service Station FSS Frequencies 13 Com Nearest FSS FrequenciesCom Nearest Weather WX Frequencies 14 Com Nearest Weather FrequenciesICS Configuration Adjust IntercomAux Audio Turn the Small knob to turn the Aux Audio On or OffIntercom On/Off function. Then, press the ENT key Intercom On/OffSpeaker On/Off Speaker On/Off function. Then, press ENTTurn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Display Contrast function. Then, press the ENT key Display ContrastDatabase Info Database Version function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Press the Func key to return to the main menu Software VersionSerial Number Serial Number function. Then, press ENTTimers Setting Up the Count Down TimerPressing CLR and then ENT will reset the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing ENT twice will stop the displayed TimerCount Down Timer Value Highlighted When Counting Up 36 Count Down Timer Value Now Counting UpThis page intentionally left blank Troubleshooting AppendixIf in Lock Out mode It can be enabledOr disabled via a Remote mounted Check Mic key inputUpdating the Frequency Database Messages All installations Power has been Re-apply power to the unitSwitch has been Radio will no longer TransmitInstallations This input will nowIndex Stuck mic 2-5 Support