Garmin 225A, 225B manual Speaker On/Off, Intercom On/Off function. Then, press the ENT key

Page 29

3.3.3Intercom On/Off

The Intercom On/Off function toggles intercom on and off. The intercom can also be toggled on/off with a remote switch, if installed. The Intercom On/ Off function must be set to On to make the Adjust Intercom function available.

1.Press FUNC to access the Functions. Turn the LARGE knob to select the ICS Function. Turn the SMALL knob to view the

Intercom On/Off function. Then, press the ENT key.

Turn SMALL Knob To Select On or Off

Press ENT to		Accept
			Press CLR to Return
the Selected Value			to the Default Value

Figure 3-19 Turn the Intercom On/Off

2.Turn the SMALL knob to set the Intercom On or Off. Then, press the ENT key to save the selected value.

3.3.4Speaker On/Off

The Speaker On/Off function toggles the speaker output on and off.

1.Press FUNC to access the Functions. Turn the LARGE knob to select the ICS Function. Turn the SMALL knob to select the

Speaker On/Off function. Then, press ENT.

Turn SMALL Knob To Select On or Off

Press ENT to		Accept
			Press CLR to Return
the Selected Value			to the Default Value

Figure 3-20 Turn the Speaker On/Off

2.Turn the SMALL knob to set the speaker output On or Off. Then, press the ENT key to save the selected value.

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

3-11

Image 29

Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation US Toll Free Canada Toll Free Product Registration and SupportContents Index Index-1 Photo Sensor Product DescriptionPilot Controls Power/Com Volume/Squelch KnobFLIP/FLOP Key Tuning LARGE/SMALL Concentric Cursor KnobsCom Key MEM KeyMON Monitor Key USB PortFunc Function Key Com Radio Power OnSelecting a Com Frequency Selected FrequencySaving a Com Channel Monitoring the Standby Com ChannelAfter selecting the desired characters, press ENT Monitor Annunciation Standby Frequency Being MonitoredSelected Wpt Type After making a selection, press ENTActive and Standby frequencies Com Database Look-UpEmergency Channel Frequency Database Reverse Look-Up Stuck MicRemote Frequency Selection Control Airport Identifier Shown For Freqs In DatabaseThis page intentionally left blank Functions Description SYS Config Com SpacingRecent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Press the CLR key to delete this User frequency Com User FrequenciesSelected Frequency Select Wpt Name Select Wpt Type Press ENT Key To Delete Selected FreqSelect User Freqs Frequencies. Press ENTSelect User Freq Value Select User Wpt NamePress ENT Key To Set Selected Freq As Standby Com Database FrequenciesIdentifier Selected Freq As ActiveCom Nearest Area Control Center ACC Frequencies Com Nearest Airports APTTurn the Small knob to display the available ACCs Turn Small Knob To Scroll Through Available Airports13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies14 Com Nearest Weather Frequencies Com Nearest Weather WX FrequenciesAdjust Intercom ICS ConfigurationTurn the Small knob to turn the Aux Audio On or Off Aux AudioSpeaker On/Off Intercom On/OffIntercom On/Off function. Then, press the ENT key Speaker On/Off function. Then, press ENTTurn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Database Info Display ContrastDisplay Contrast function. Then, press the ENT key Database Version function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Serial Number Software VersionPress the Func key to return to the main menu Serial Number function. Then, press ENTSetting Up the Count Down Timer TimersViewing Timers in the Com Display Setting Up the Count Up TimerPressing CLR and then ENT will reset the displayed Timer Pressing ENT twice will stop the displayed Timer36 Count Down Timer Value Now Counting Up Count Down Timer Value Highlighted When Counting UpThis page intentionally left blank Appendix TroubleshootingOr disabled via a Remote mounted It can be enabledIf in Lock Out mode Check Mic key inputUpdating the Frequency Database Messages Switch has been Power has been Re-apply power to the unitAll installations Radio will no longer TransmitThis input will now InstallationsIndex Stuck mic 2-5 Support