Garmin 225B Software Version, Serial Number, Press the Func key to return to the main menu

Page 34

5.Wait until the updating process is complete and then remove the memory device and cable.The unit will reset automatically once the database is updated.

6.Verify the correct frequency database is loaded after power-up.

3.4.6Software Version

The software versions of the GTR 225 unit are displayed. This information is useful when contacting Customer Support.

1.Press FUNC to access the Functions. Turn the LARGE knob to select the SYS Function.

2. Turn the SMALL knob to view the Software Version function. Then, press the ENT key.

Display Software Version

Com Software Version

Figure 3-27 Software Versions Display

3. Press the FUNC key to return to the main menu.

3.4.7Serial Number

The serial number of the GTR 225 unit is displayed. This information is useful when contacting Customer Support.

1.Press FUNC to access the Functions. Turn the LARGE knob to select the SYS Function. Turn the SMALL knob to view the

Serial Number function. Then, press ENT.

Unit Serial Number

ID Is Used With The flyGarmin Services

Figure 3-28 Serial Number Display

2. Press the FUNC key to return to the main menu.

3-16

Garmin GTR 225/225A/225B Pilot’s Guide

190-01182-00 Rev. A

Image 34

Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation Product Registration and Support US Toll Free Canada Toll FreeContents Index Index-1 Product Description Photo SensorPower/Com Volume/Squelch Knob Pilot ControlsCom Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key MEM KeyFunc Function Key USB PortMON Monitor Key Selecting a Com Frequency Power OnCom Radio Selected FrequencyAfter selecting the desired characters, press ENT Monitoring the Standby Com ChannelSaving a Com Channel Monitor Annunciation Standby Frequency Being MonitoredAfter making a selection, press ENT Selected Wpt TypeEmergency Channel Com Database Look-UpActive and Standby frequencies Remote Frequency Selection Control Stuck MicFrequency Database Reverse Look-Up Airport Identifier Shown For Freqs In DatabaseThis page intentionally left blank SYS Config Com Spacing Functions DescriptionCom Frequencies Press the Func key to access the FunctionsRecent Com Frequencies Selected Frequency Select Wpt Name Select Wpt Type Com User FrequenciesPress the CLR key to delete this User frequency Press ENT Key To Delete Selected FreqSelect User Freq Value Frequencies. Press ENTSelect User Freqs Select User Wpt NameIdentifier Com Database FrequenciesPress ENT Key To Set Selected Freq As Standby Selected Freq As ActiveTurn the Small knob to display the available ACCs Com Nearest Airports APTCom Nearest Area Control Center ACC Frequencies Turn Small Knob To Scroll Through Available AirportsCom Nearest Flight Service Station FSS Frequencies 13 Com Nearest FSS FrequenciesCom Nearest Weather WX Frequencies 14 Com Nearest Weather FrequenciesICS Configuration Adjust IntercomAux Audio Turn the Small knob to turn the Aux Audio On or OffIntercom On/Off function. Then, press the ENT key Intercom On/OffSpeaker On/Off Speaker On/Off function. Then, press ENTCom Spacing System ConfigurationTurn the Small Knob to Select the Channel Spacing Brightness Display BrightnessSelect the Offset Value Display Contrast function. Then, press the ENT key Display ContrastDatabase Info Database Version function. Then, press the ENT keyLoad Database function. Then, press the ENT key Load DatabaseUSB Port USB Cable USB Memory Device Press the Func key to return to the main menu Software VersionSerial Number Serial Number function. Then, press ENTTimers Setting Up the Count Down TimerPressing CLR and then ENT will reset the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing ENT twice will stop the displayed TimerCount Down Timer Value Highlighted When Counting Up 36 Count Down Timer Value Now Counting UpThis page intentionally left blank Troubleshooting AppendixIf in Lock Out mode It can be enabledOr disabled via a Remote mounted Check Mic key inputUpdating the Frequency Database Messages All installations Power has been Re-apply power to the unitSwitch has been Radio will no longer TransmitInstallations This input will nowIndex Stuck mic 2-5 Support