Garmin 225A, 225B manual This input will now, Installations

Page 44

Message

Description

Action

REMOTE KEY

The remote com

Verify the COM CHAN UP key/

STUCK -

frequency increment

switch is not stuck. Contact dealer

Com remote

(COM CHAN UP) key/

for service if this message persists.

frequency

switch has been in

 

increment key is

pressed position for

 

stuck.

at least 30 seconds.

 

 

This input will now

 

 

be ignored. This input

 

 

is not available in all

 

 

installations.

 

REMOTE KEY

The remote com

Verify the COM CHAN DN key/

STUCK -

frequency decrement

switch is not stuck. Contact dealer

Com remote

(COM CHAN DN) key/

for service if this message persists.

frequency

switch has been in

 

decrement key is

pressed position for

 

stuck.

at least 30 seconds.

 

 

This input will now

 

 

be ignored. This input

 

 

is not available in all

 

 

installations.

 

 

Table 4-2 Messages

4-6

Garmin GTR 225/225A/225B Pilot’s Guide

190-01182-00 Rev. A

Image 44
Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation Product Registration and Support US Toll Free Canada Toll FreeContents Index Index-1 Product Description Photo SensorPower/Com Volume/Squelch Knob Pilot ControlsTuning LARGE/SMALL Concentric Cursor Knobs FLIP/FLOP KeyCom Key MEM KeyMON Monitor Key USB PortFunc Function Key Power On Com RadioSelecting a Com Frequency Selected FrequencyMonitoring the Standby Com Channel Saving a Com ChannelAfter selecting the desired characters, press ENT Monitor Annunciation Standby Frequency Being MonitoredAfter making a selection, press ENT Selected Wpt TypeActive and Standby frequencies Com Database Look-UpEmergency Channel Stuck Mic Frequency Database Reverse Look-UpRemote Frequency Selection Control Airport Identifier Shown For Freqs In DatabaseThis page intentionally left blank SYS Config Com Spacing Functions DescriptionRecent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Com User Frequencies Press the CLR key to delete this User frequencySelected Frequency Select Wpt Name Select Wpt Type Press ENT Key To Delete Selected FreqFrequencies. Press ENT Select User FreqsSelect User Freq Value Select User Wpt NameCom Database Frequencies Press ENT Key To Set Selected Freq As StandbyIdentifier Selected Freq As ActiveCom Nearest Airports APT Com Nearest Area Control Center ACC FrequenciesTurn the Small knob to display the available ACCs Turn Small Knob To Scroll Through Available AirportsCom Nearest Flight Service Station FSS Frequencies 13 Com Nearest FSS FrequenciesCom Nearest Weather WX Frequencies 14 Com Nearest Weather FrequenciesICS Configuration Adjust IntercomAux Audio Turn the Small knob to turn the Aux Audio On or OffIntercom On/Off Speaker On/OffIntercom On/Off function. Then, press the ENT key Speaker On/Off function. Then, press ENTTurn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Display Contrast Database InfoDisplay Contrast function. Then, press the ENT key Database Version function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Software Version Serial NumberPress the Func key to return to the main menu Serial Number function. Then, press ENTTimers Setting Up the Count Down TimerSetting Up the Count Up Timer Viewing Timers in the Com DisplayPressing CLR and then ENT will reset the displayed Timer Pressing ENT twice will stop the displayed TimerCount Down Timer Value Highlighted When Counting Up 36 Count Down Timer Value Now Counting UpThis page intentionally left blank Troubleshooting AppendixIt can be enabled Or disabled via a Remote mountedIf in Lock Out mode Check Mic key inputUpdating the Frequency Database Messages Power has been Re-apply power to the unit Switch has beenAll installations Radio will no longer TransmitInstallations This input will nowIndex Stuck mic 2-5 Support