Garmin 225A Com Database Frequencies, Press ENT Key To Set Selected Freq As Standby, Identifier

Page 23

3.2.3Com Database Frequencies

The GTR 225 contains a large database of Com frequencies that may be recalled by identifier.

Turn SMALL Knob

To Select Character

Turn LARGE Knob

To Move Cursor

Figure 3-9 Com Database Frequencies

1.Press FUNC to access the Functions. With the Com Frequency Function highlighted, turn the SMALL knob to view the Com

Database function. Then, press ENT.

2.Turn the SMALL knob to select the desired character.

3.Turn the LARGE knob to move the cursor to highlight a character.

4.Repeat steps 2 and 3 to complete the desired identifier and then press the ENT key.

5.If available, the Frequency Type will be highlighted. Turn the SMALL knob to select the desired frequency.

Press ENT Key To Set

Selected Freq As Standby

								Selected Frequency
								Selected Frequency
							Turn SMALL Knob
							Turn SMALL Knob
Press FLIP/FLOP Key To Set			Selected	Identifier			To Select Freq Type
Selected Freq As Active

Figure 3-10 Selected Com Database Frequency

6.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

7.Press the ENT key to set the selected frequency as the Standby frequency.

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

3-5

Image 23

Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation US Toll Free Canada Toll Free Product Registration and SupportContents Index Index-1 Photo Sensor Product DescriptionPilot Controls Power/Com Volume/Squelch KnobMEM Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key Com KeyMON Monitor Key USB PortFunc Function Key Selected Frequency Power OnCom Radio Selecting a Com FrequencyMonitor Annunciation Standby Frequency Being Monitored Monitoring the Standby Com ChannelSaving a Com Channel After selecting the desired characters, press ENTSelected Wpt Type After making a selection, press ENTActive and Standby frequencies Com Database Look-UpEmergency Channel Airport Identifier Shown For Freqs In Database Stuck MicFrequency Database Reverse Look-Up Remote Frequency Selection ControlThis page intentionally left blank Functions Description SYS Config Com SpacingRecent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Press ENT Key To Delete Selected Freq Com User FrequenciesPress the CLR key to delete this User frequency Selected Frequency Select Wpt Name Select Wpt TypeSelect User Wpt Name Frequencies. Press ENTSelect User Freqs Select User Freq ValueSelected Freq As Active Com Database FrequenciesPress ENT Key To Set Selected Freq As Standby IdentifierTurn Small Knob To Scroll Through Available Airports Com Nearest Airports APTCom Nearest Area Control Center ACC Frequencies Turn the Small knob to display the available ACCs13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies14 Com Nearest Weather Frequencies Com Nearest Weather WX FrequenciesAdjust Intercom ICS ConfigurationTurn the Small knob to turn the Aux Audio On or Off Aux AudioSpeaker On/Off function. Then, press ENT Intercom On/OffSpeaker On/Off Intercom On/Off function. Then, press the ENT keyTurn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Database Version function. Then, press the ENT key Display ContrastDatabase Info Display Contrast function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Serial Number function. Then, press ENT Software VersionSerial Number Press the Func key to return to the main menuSetting Up the Count Down Timer TimersPressing ENT twice will stop the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing CLR and then ENT will reset the displayed Timer36 Count Down Timer Value Now Counting Up Count Down Timer Value Highlighted When Counting UpThis page intentionally left blank Appendix TroubleshootingCheck Mic key input It can be enabledOr disabled via a Remote mounted If in Lock Out modeUpdating the Frequency Database Messages Radio will no longer Transmit Power has been Re-apply power to the unitSwitch has been All installationsThis input will now InstallationsIndex Stuck mic 2-5 Support