Garmin 225A, 225B manual November

Page 2

© 2012 Garmin Ltd. or its subsidiaries. All rights reserved.

This manual reflects the operation of System Software version 2.00, or later. Some differences in operation may be observed when comparing the information in this manual to later software versions.

Garmin International, Inc., 1200 East 151st Street, Olathe, KS 66062, U.S.A.

Tel: 913/397.8200	Fax: 913/397.8282
Garmin AT, Inc., 2345 Turner Road SE, Salem, OR 97302, U.S.A.
Tel: 503/391.3411	Fax 503/364.2138
Garmin (Europe) Ltd., Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton,
SO40 9RB, U.K.
Tel. +44 (0) 870 850 1243	Fax +44 (0) 238 052 4004

Garmin Corporation, No. 68, Zhangshu 2nd Road, Xizhi Dist., New Taipei City 221, Taiwan (R.O.C.)

Tel: 886/02.2642.9199	Fax: 886/02.2642.9099
Garmin Singapore Pte. Ltd., 46 East Coast Road, #05-06 Eastgate, Singapore 428766
Tel : (65) 63480378	Fax : ( 65 ) 63480278

At Garmin, we value your opinion. For comments about this guide, please e-mail: Techpubs.Salem@Garmin.com

www.garmin.com https://fly.garmin.com/fly-garmin

Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

This part shall comply with Garmin Banned and Restricted Substances document, 001-00211-00.

Garmin® is a registered trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

November 2012

Printed in the U.S.A.

Image 2

Contents GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation Product Registration and Support US Toll Free Canada Toll FreeContents Index Index-1 Product Description Photo SensorPower/Com Volume/Squelch Knob Pilot ControlsCom Key Tuning LARGE/SMALL Concentric Cursor KnobsFLIP/FLOP Key MEM KeyMON Monitor Key USB PortFunc Function Key Selecting a Com Frequency Power OnCom Radio Selected FrequencyAfter selecting the desired characters, press ENT Monitoring the Standby Com ChannelSaving a Com Channel Monitor Annunciation Standby Frequency Being MonitoredAfter making a selection, press ENT Selected Wpt TypeActive and Standby frequencies Com Database Look-UpEmergency Channel Remote Frequency Selection Control Stuck MicFrequency Database Reverse Look-Up Airport Identifier Shown For Freqs In DatabaseThis page intentionally left blank SYS Config Com Spacing Functions DescriptionRecent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Selected Frequency Select Wpt Name Select Wpt Type Com User FrequenciesPress the CLR key to delete this User frequency Press ENT Key To Delete Selected FreqSelect User Freq Value Frequencies. Press ENTSelect User Freqs Select User Wpt NameIdentifier Com Database FrequenciesPress ENT Key To Set Selected Freq As Standby Selected Freq As ActiveTurn the Small knob to display the available ACCs Com Nearest Airports APTCom Nearest Area Control Center ACC Frequencies Turn Small Knob To Scroll Through Available AirportsCom Nearest Flight Service Station FSS Frequencies 13 Com Nearest FSS FrequenciesCom Nearest Weather WX Frequencies 14 Com Nearest Weather FrequenciesICS Configuration Adjust IntercomAux Audio Turn the Small knob to turn the Aux Audio On or OffIntercom On/Off function. Then, press the ENT key Intercom On/OffSpeaker On/Off Speaker On/Off function. Then, press ENTTurn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Display Contrast function. Then, press the ENT key Display ContrastDatabase Info Database Version function. Then, press the ENT keyUSB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Press the Func key to return to the main menu Software VersionSerial Number Serial Number function. Then, press ENTTimers Setting Up the Count Down TimerPressing CLR and then ENT will reset the displayed Timer Setting Up the Count Up TimerViewing Timers in the Com Display Pressing ENT twice will stop the displayed TimerCount Down Timer Value Highlighted When Counting Up 36 Count Down Timer Value Now Counting UpThis page intentionally left blank Troubleshooting AppendixIf in Lock Out mode It can be enabledOr disabled via a Remote mounted Check Mic key inputUpdating the Frequency Database Messages All installations Power has been Re-apply power to the unitSwitch has been Radio will no longer TransmitInstallations This input will nowIndex Stuck mic 2-5 Support