Prestige 100 and 100IH ISDN Router and Router/Hub
10.1 System Status
The first selection, System Status, gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ISDN telephone line status, number of packets sent and number of packets received.
To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status. There are five commands in Menu 24.1 - System Maintenance - Status. Entering 1 disconnects the current B1 channel call; 2 disconnects the current B2 channel call, 3 resets the counters, 4 drops both B1 and B2 and ESC takes you back to the previous screen.
The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are
|
|
| Menu 24.1 |
|
| |||
Chan | Link | Type | TXPkts | RXPkts | Errors | CLU | ALU | Up Time |
Down | 0Kbps | 0 | 0 | 0 | 0% | 0% | 0:00:00 | |
Down | 0Kbps | 0 | 0 | 0 | 0% | 0% | 0:00:00 | |
Total Outcall Time: | 0:00:00 |
|
Ethernet: | WAN: |
|
Status: 10M/Half Duplex | Chan 1 IP Addr: |
|
TX Pkts: 230 | Chan 2 IP Addr: |
|
RX Pkts: 0 | Chan 1 CLID: |
|
Collisions: 0 | Chan 2 CLID: |
|
LAN Packet Which Triggered Last Call: |
| |
| Press Command: |
|
COMMANDS: | ||
Figure 10-2 Menu 24.1 - System Maintenance – Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status.
System Maintenance |