Prestige 100 and 100IH ISDN Router and Router/Hub
10.2.2 Syslog And Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Syslog and Accounting, as shown below.
Menu 24.3.2
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 10-7 Menu 24.3.2 - System Maintenance - Syslog and Accounting
You need to configure the following 3 parameters described in the table below to activate syslog.
Table 10-3 System Maintenance Menu Syslog Parameters
Parameter | Description |
|
|
Active | Use the space bar to turn on or off syslog. |
|
|
Syslog IP Address | Enter the IP Address of your syslog server. |
|
|
Log Facility | Use the space bar to toggle between the 7 different Local options. The log facility |
| allows you to log the message in different files in the server. Please refer to your |
| UNIX manual for more detail. |
|
|
Your Prestige sends three types of syslog messages: call information messages (i.e., CDR), error information messages and session information messages. Some examples of these syslog messages are shown below:
1. Call Information Messages:
System Maintenance |
|