Prestige 100 and 100IH ISDN Router and Router/Hub
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Table 3-2 TCP/IP Ethernet Setup Menu Fields
| Field | Description | Example |
|
|
|
|
| TCP/IP Setup |
|
|
| IP | Enter the IP address of your Prestige in dotted decimal notation | 192.168.1.1 |
| Address |
| (default) |
| IP Subnet Mask | Your Prestige will automatically calculate the subnet mask based | 255.255.255.0 |
|
| on the IP address that you assign. Unless you are implementing |
|
|
| subnetting, use the subnet mask computed by the Prestige |
|
| RIP | Press the space bar to select the RIP direction from Both/In | Both |
| Direction | Only/Out Only. | (default) |
|
|
| |
| Version | Press the space bar to select the RIP version from |
|
|
| ||
|
|
| (default) |
|
|
| |
|
|
|
|
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
Internet Access |