Prestige 100 and 100IH ISDN Router and Router/Hub
To update software, system needs to be rebooted.
After system is rebooted, 'Enter Debug Mode' will be displayed.
Please enter 'atur' to upload RAS and ISDN code.
Do you want to continue (y/n):
Enter Menu Selection Number:
Figure 10-11 Menu 24.7 – Software Update
10.6.1 Boot module commands
Prestige boot module commands are shown below. For ATBAx, x denotes the number preceeding the colon to give the console port speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command shows product related information such as boot module version, vendor name, product model, RAS code revision, ISDN code revision, etc.
======= Debug Command Listing =======
ATHE | print help |
ATGO | boot system |
ATUR | upload RAS code |
ATUR3 | upload RAS configuration file |
ATBAx | change baud rate. 1:38.4,2:19.2,3:9.6,4:57.6,5:115.2 |
ATTD | download configuration to PC |
ATSE | display seed for password generation |
ATSH | display Revision and etc |
|
|
| Figure |
System Maintenance |