SET Present Time of DAY, Hardness Number

SET PRESENT TIME OF DAY

If the words PRESENT TIME do not show in the display, press the SELECT1 button until they do show in the dis- play. Press the UP or DOWN buttons to set the present time. Press UP to move the display ahead; press DOWN to move the time backward. If the present time is between noon and midnight, be sure PM shows. If the present time is between midnight and noon, be sure AM shows. Each press of the UP or DOWN buttons changes the time by one (1) minute. Holding the buttons in changes the time rapidly.

SET WATER HARDNESS NUMBER

To set the water hardness number, complete the following steps:

1. Press the SELECT1	button once to display 25 (flashing)
and HARDNESS. The grains per gallon (gpg) hardness
of your water supply	is on your water analysis report. Be
sure to enter water test results on the Facts & Figure
Chart on page 3.

ILl, 70	U,I-I	I-I PM
ILl, 70	I'UU
PRESENT TIME
11 PRESENT		TIME
		FIG. 26
8
	HARDNESS
I	,-,,-,
_ ___	_
		FIG. 27
8	I- ,LII_I
	RECHARGE
	TIME

2. If your water supply contains iron, compensate for it by

adding to the water hardness number. For example,

assume your water is 20 gpg hard and contains 2 ppm

iron. Add 5 to the hardness number for each I ppm of

iron. In this example, you would use 30 for your hard-

ness number.

2ppmironx5= 10

20 gpg hardness

+10

30 HARDNESS NUMBER

i ,-,, ,,_ I

[_ _;_ OF

FIG. 28

I I-

I-<L I

FIG. 29

,Press the UP or DOWN buttons to set your water hard- ness number in the display. The DOWN button moves the display to 1. The UP button moves the display to the highest setting (see maximum setting for your model in the specifications).

NOTE: Each press of the UP or DOWN button changes the display by 1 between 1 and 25. Between 25 and the highest number, the display changes 5 at a time (25, 30, 35, etc.) Holding the UP

or DOWN button in changes the display twice each second.

SET REGENERATION TIME

To complete setting the regeneration time, complete the following steps:

1.Press the SELECT1 button to display 2:00 AM (flashing) and RECHARGE TIME.

,At the 2:00 AM recharge time setting, the softener begins regeneration (see pages 26 - 28) at 2:00 AM. This is a good time in most households because water is not being used. If a different recharge time setting would be better for your household, complete the follow- ing step.

3.Press the UP or DOWN buttons to set the desired recharge starting hour. Be sure to observe the AM- PM as you did when setting the present time of day.

Note: Each press of the UP or DOWN buttons changes the display one hour. Holding the but- tons in changes the display twice each second.

SET SALT TYPE (sodium chloride or potassium chloride)

To set the salt type, complete the following steps:

1.Press the SELECT 1 button to display nACI, the default setting.

,If you want to use potassium chloride (KCl) instead of standard sodium chloride (NaCl) water softener salt, be sure to set KCl in the display by using the UP button. The KCl setting adjusts regeneration cycle times to compensate for the variable dissolving rate of potassium chloride. Refer to page 20 for infor- mation on various salts.

3.Press the SELECT button once again, to complete initial programming, and the current time of day shows in the display.

Questions? Call The Kenmore Water Line 1-800-426-9345

625.38376 specifications

The Kenmore 625.38376 is a versatile and efficient air purifier designed to enhance indoor air quality in various environments, including homes, offices, and other spaces. This model is particularly recognized for its impressive filtration capabilities and user-friendly features, making it a popular choice among consumers seeking cleaner air.

One of the standout features of the Kenmore 625.38376 is its advanced three-stage filtration system. This system includes a pre-filter, a true HEPA filter, and an activated carbon filter. The pre-filter captures larger particles such as dust and pet hair, which helps to extend the life of the HEPA filter. The true HEPA filter is capable of trapping 99.97% of particles as small as 0.3 microns, effectively removing allergens like pollen, smoke, and mold spores from the air. The activated carbon filter further enhances the unit's performance by absorbing odors and volatile organic compounds (VOCs), contributing to a fresher indoor environment.

In addition to its powerful filtration system, the Kenmore 625.38376 includes several user-friendly technologies and features. The air purifier is equipped with a smart air quality sensor that continuously monitors the air quality in real-time. This sensor automatically adjusts the fan speed based on the pollution levels detected, ensuring optimal cleaning performance without unnecessary energy consumption. Users can easily track air quality levels through an intuitive digital display that shows the current status.

Another significant characteristic of the Kenmore 625.38376 is its quiet operation. The unit is designed to operate at low noise levels, making it suitable for use in bedrooms and other quiet spaces. It features multiple fan speeds, allowing users to adjust the airflow according to their specific preferences and needs.

The Kenmore 625.38376 is also energy efficient, certified by ENERGY STAR. This certification assures consumers that the unit meets stringent energy efficiency guidelines, promoting lower electricity bills and a reduced environmental impact.

In summary, the Kenmore 625.38376 air purifier combines advanced filtration technologies, smart sensors, quiet operation, and energy efficiency to create a reliable solution for improved indoor air quality. Its thoughtful design and effective performance make it an excellent choice for individuals looking to breathe cleaner air in their homes.