3Com V7000 manual Office Configured, AllComponents both the IP

18CHAPTER 1: 3COM VCX IP TELEPHONY SERVER

Table 4 IP Messaging Identification Tab

Attribute	Description	Settings
System Type	Identifies the server type based on the	Read-only
	components that are installed and running
	on this server, which affect the features
	made available by the server.
	■ allComponents – both the IP
	Telephony and IP Messaging servers are
	installed
	■ callServer – only the VCX Call
	Processor is installed
	■ dataServer – only the VCX Data Server
	is installed
	■ ipMessagingServer – only the IP
	Messaging server is installed
	■ Softswitch – only the IP Telephony
	server is installed
	■ billingSupportServer – only the
	billing support server is installed
	■ undetermined – cannot determine
	server tye
User Label	A label assign by the user.	String
Vendor	The vendor name of this software.	Read-only
Version	The current version of this software.	Read-only

Verifying the Type of To determine if the server is a regional or branch office:

Office Configured

1Log into EMS.

2From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.

3From the Properties tab, click Identification.

4From the Site Type field, the office type is listed such as regional or

branch.

Verifying the Type of To determine the type of components installed on a server:

Components Installed on a Server

1Log into EMS.

2From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.