Inova SX150-BHF, SL150, USO56, SL125OC manual Tool Operation Check, Maintaining the Pneumatic Tool

Page 10

TOOL OPERATION CHECK:

CAUTION: Remove all fasteners from tool before performing tool operation check.

1.TRIGGER OPERATED TOOL:

A.With finger off the trigger, hold the tool with a firm grip on the handle.

B.Place the nose of the tool against the work surface.

C.Pull the trigger to drive. Release the trigger and cycle is complete.

CAUTION: THE TOOL WILL CYCLE EACH TIME THE TRIGGER IS PULLED!

2.CONTACT TRIP OPERATION:

A.With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C.With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D.Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

3.SEQUENTIAL TRIP OPERATION:

A.Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C.Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D.With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

MAINTAINING THE PNEUMATIC TOOL

When working on air tools, note the warnings in this manual and use extra care evaluating problem tools.

CAUTION: Pusher spring (constant force spring). Caution must be used when working with the spring assembly. The spring is wrapped around, but not attached to, a roller. If the spring is extended beyond its length, the end will come off the roller and the spring will roll up with a snap, with a chance of pinching your hand. Also the edges of the spring are very thin and could cut. Care must also be taken to insure no permanent kinks are put in the spring as this will reduce the springs force.

REPLACEMENT PARTS:

BOSTITCH replacement parts are recommended. Do not use modified parts or parts which will not give equivalent performance to the original equipment.

ASSEMBLY PROCEDURE FOR SEALS:

When repairing a tool, make sure the internal parts are clean and lubricated. Use Parker “O”-LUBE or equivalent on all “O”-rings. Coat each “O”-ring with “O”-LUBE before assembling.

AIR SUPPLY-PRESSURE AND VOLUME:

Air volume is as important as air pressure. The air volume supplied to the tool may be inadequate because of undersize fittings and hoses, or from the effects of dirt and water in the system. Restricted air flow will prevent the tool from receiving an adequate volume of air, even though the pressure reading is high. The results will be slow operation, misfeeds or reduced driving power. Before evaluating tool problems for these symptoms, trace the air supply from the tool to the supply source for restrictive connectors, swivel fittings, low points containing water and anything else that would prevent full volume flow of air to the tool.

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Stanley Fastening Systems L.P Introduction IndexLoading Tool Safety InstructionsAIR Supply and Connections OperationTool AIR Fitting Tool SpecificationsFastener Specifications Operating PressureTrigger Operated Contact TripSequential Trip Model IdentificationSupply Source FittingsHoses RegulatorLoading the SL150, SX150, LHF97125, USO56, SL125OC, S97125 To Prevent Accidental InjuriesDIAL-A-DEPTH Fastener Control Adjustment BOSTITCH, INCContact Trip Operation Tool OperationBefore Handling or Operating this Tool Sequential Trip OperationTool Operation Check Maintaining the Pneumatic ToolTrouble Shooting Problem Cause CorrectionÍndice IntroducciónNota AL Cargar LA Herramienta Instrucciones DE SeguridadSuministro DE Aire Y Conexiones OperaciónConector DE Aire DE LA Herramienta Especificaciones DE LA HerramientaEspecificaciones DE GRAPAS/PUNTAS Presión Opera TivaOperación POR GA Tillo Disparo POR ContactoDisparo Secuencial Identificación DE ModeloFuente DE Suministro ConexionesMangueras ReguladorCarga DE LOS Modelos SL150, SX150, LHF97125, USO56 Advertencia Para Impedir Lesiones AccidentalesAjuste DE Control DE Engrapado DIAL-A-DEPTH Operación DE Disp ARO POR Contacto Operación DE LA HerramientaAntes DE Manejar U Operar Esta Herramienta Operación DE Disp ARO SecuencialVerificación DE LA Operación DE LA Herramienta Mantenimiento DE LA Herramienta NeumáticaProblema Causa Corrección Diagnóstico DE FallaIndexe RemarqueChargement DE L’APPAREIL Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement FonctionnementGarniture Pneumatique Spécifications DE L’OUTILSpécifica Tions DES Dispositifs DE Fixation Pression DE FonctionnementDéclenchement AU COUP-PAR-COUP OpérationDéclenchement À LA Volée Déclenchement P AR DétenteAlimentation EN AIR Comprimé RaccordementsTuyaux Régula TeurChargement DE SL150, SX150, LHF97125, USO56 SL125OC, S97125 Pour Prévenir UN AccidentCommande DE Réglage DES Dispositifs DE Fixation DIAL-A-DEPTH Fonctionnement DE L’APPAREIL Mode D’EMPLOIAvant DE Manipuler OU D’UTILISER CET Outil Maintenance DE L’OUTIL Pneumatique Vérification DU Système DE DéclenchementProblèmes DE Fonctionnement Problème Cause Correction

S97125, SX150, SX150-BHF, BT125, SL125OC specifications

The Inova USO56, LHF97125, SL150, BT200, and SL125OC are advanced LED lighting solutions designed for various applications, including commercial, industrial, and residential lighting. Each model brings unique features and cutting-edge technology that cater to different user needs.

Starting with the Inova USO56, this robust LED solution is designed for high-efficiency performance in demanding environments. It utilizes a durable construction that withstands harsh conditions, making it ideal for outdoor applications. The USO56 is equipped with energy-efficient LED chips that provide superior brightness while consuming minimal power. Its advanced thermal management system ensures optimal performance and longevity, reducing the need for frequent replacements and maintenance.

The LHF97125 model, on the other hand, focuses on versatility and adaptability. This fixture features adjustable brightness levels, allowing users to customize the light output according to their specific requirements. The LHF97125 includes smart technology capabilities, enabling integration with building management systems for enhanced energy savings. Its sleek design makes it suitable for modern office spaces, retail environments, and public areas.

The SL150 is another standout product, specifically designed for high-traffic zones. This LED lighting solution offers exceptional durability with an IP65 rating, making it resistant to dust and water ingress. The SL150 is equipped with motion-sensing technology, providing automatic illumination in response to movement, which enhances energy efficiency and security. Its flexible mounting options and compact design allow for easy installation in various settings.

The BT200 model is renowned for its innovative smart features. It comes with built-in Wi-Fi connectivity, allowing users to control lighting remotely via a smartphone app. The BT200 supports various lighting modes and schedules, giving users complete flexibility in managing their lighting needs. This model is particularly popular for residential applications, where convenience and atmosphere are paramount.

Lastly, the SL125OC offers a blend of elegance and functionality. With an ultra-slim profile, this model is perfect for spaces where aesthetics are a priority. The SL125OC features dimmable capabilities and utilizes energy-efficient LED technology, making it an eco-friendly choice for homeowners and businesses alike. Its easy installation process makes it accessible for anyone looking to upgrade their lighting without extensive renovations.

In conclusion, the Inova USO56, LHF97125, SL150, BT200, and SL125OC each bring unique features and technologies to the lighting market, addressing the diverse needs of users across different sectors. With a commitment to energy efficiency, durability, and smart technology, Inova continues to push the boundaries of lighting innovation.
Top Page Image Contents