Inova LHF97125, SX150-BHF, SL150, USO56, SL125OC Fittings, Hoses, Supply Source, Regulator, Filter

Page 6

AIR SUPPLY AND CONNECTIONS

Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode, possibly causing injury.

FITTINGS:

Install a male plug on the tool which is free flowing and which will release air pressure from the tool when disconnected from the supply source.

HOSES:

Air hoses should have a minimum of 150 p.s.i. (10.6 kg/cm2) working pressure rating or 150 percent of the maximum pressure that could be produced in the air system. The supply hose should contain a fitting that will provide “quick disconnecting” from the male plug on the tool.

SUPPLY SOURCE:

Use only clean regulated compressed air as a power source for this tool. NEVER USE OXYGEN, COMBUSTIBLE GASES, OR BOTTLED GASES, AS A POWER SOURCE FOR THIS TOOL AS TOOL MAY EXPLODE.

REGULATOR:

A pressure regulator with an operating pressure of 0 - 125 p.s.i. (0 - 8.79 KG/CM2) is required to control the operatiing pressure for safe operation of this tool. Do not connect this tool to air pressure which can potentially exceed 200 p.s.i. (14 KG/CM2) as tool may fracture or burst, possibly causing injury.

OPERATING PRESSURE:

Do not exceed recommended maximum operating pressure as tool wear will be greatly increased. The air supply must be capable of maintaining the operating pressure at the tool. Pressure drops in the air supply can reduce the tool’s driving power. Refer to “TOOL SPECIFICATIONS” for setting the correct operating pressure for the tool.

FILTER:

Dirt and water in the air supply are major causes of wear in pneumatic tools. A filter will help to get the best performance and minimum wear from the tool. The filter must have adequate flow capacity for the specific installation. The filter has to be kept clean to be effective in providing clean compressed air to the tool. Consult the manufacturer’s instructions on proper maintenance of your filter. A dirty and clogged filter will cause a pressure drop which will reduce the tool’s performance.

-6-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Stanley Fastening Systems L.P Introduction IndexLoading Tool Safety InstructionsAIR Supply and Connections OperationTool AIR Fitting Tool SpecificationsFastener Specifications Operating PressureTrigger Operated Contact TripSequential Trip Model IdentificationSupply Source FittingsHoses RegulatorLoading the SL150, SX150, LHF97125, USO56, SL125OC, S97125 To Prevent Accidental InjuriesDIAL-A-DEPTH Fastener Control Adjustment BOSTITCH, INCContact Trip Operation Tool OperationBefore Handling or Operating this Tool Sequential Trip OperationTool Operation Check Maintaining the Pneumatic ToolTrouble Shooting Problem Cause CorrectionIntroducción ÍndiceNota AL Cargar LA Herramienta Instrucciones DE SeguridadSuministro DE Aire Y Conexiones OperaciónConector DE Aire DE LA Herramienta Especificaciones DE LA HerramientaEspecificaciones DE GRAPAS/PUNTAS Presión Opera TivaOperación POR GA Tillo Disparo POR ContactoDisparo Secuencial Identificación DE ModeloFuente DE Suministro ConexionesMangueras ReguladorCarga DE LOS Modelos SL150, SX150, LHF97125, USO56 Advertencia Para Impedir Lesiones AccidentalesAjuste DE Control DE Engrapado DIAL-A-DEPTH Operación DE Disp ARO POR Contacto Operación DE LA HerramientaAntes DE Manejar U Operar Esta Herramienta Operación DE Disp ARO SecuencialVerificación DE LA Operación DE LA Herramienta Mantenimiento DE LA Herramienta NeumáticaProblema Causa Corrección Diagnóstico DE FallaIndexe RemarqueChargement DE L’APPAREIL Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement FonctionnementGarniture Pneumatique Spécifications DE L’OUTILSpécifica Tions DES Dispositifs DE Fixation Pression DE FonctionnementDéclenchement AU COUP-PAR-COUP OpérationDéclenchement À LA Volée Déclenchement P AR DétenteAlimentation EN AIR Comprimé RaccordementsTuyaux Régula TeurChargement DE SL150, SX150, LHF97125, USO56 SL125OC, S97125 Pour Prévenir UN AccidentCommande DE Réglage DES Dispositifs DE Fixation DIAL-A-DEPTH Mode D’EMPLOI Fonctionnement DE L’APPAREILAvant DE Manipuler OU D’UTILISER CET Outil Maintenance DE L’OUTIL Pneumatique Vérification DU Système DE DéclenchementProblèmes DE Fonctionnement Problème Cause Correction

S97125, SX150, SX150-BHF, BT125, SL125OC specifications

The Inova USO56, LHF97125, SL150, BT200, and SL125OC are advanced LED lighting solutions designed for various applications, including commercial, industrial, and residential lighting. Each model brings unique features and cutting-edge technology that cater to different user needs.

Starting with the Inova USO56, this robust LED solution is designed for high-efficiency performance in demanding environments. It utilizes a durable construction that withstands harsh conditions, making it ideal for outdoor applications. The USO56 is equipped with energy-efficient LED chips that provide superior brightness while consuming minimal power. Its advanced thermal management system ensures optimal performance and longevity, reducing the need for frequent replacements and maintenance.

The LHF97125 model, on the other hand, focuses on versatility and adaptability. This fixture features adjustable brightness levels, allowing users to customize the light output according to their specific requirements. The LHF97125 includes smart technology capabilities, enabling integration with building management systems for enhanced energy savings. Its sleek design makes it suitable for modern office spaces, retail environments, and public areas.

The SL150 is another standout product, specifically designed for high-traffic zones. This LED lighting solution offers exceptional durability with an IP65 rating, making it resistant to dust and water ingress. The SL150 is equipped with motion-sensing technology, providing automatic illumination in response to movement, which enhances energy efficiency and security. Its flexible mounting options and compact design allow for easy installation in various settings.

The BT200 model is renowned for its innovative smart features. It comes with built-in Wi-Fi connectivity, allowing users to control lighting remotely via a smartphone app. The BT200 supports various lighting modes and schedules, giving users complete flexibility in managing their lighting needs. This model is particularly popular for residential applications, where convenience and atmosphere are paramount.

Lastly, the SL125OC offers a blend of elegance and functionality. With an ultra-slim profile, this model is perfect for spaces where aesthetics are a priority. The SL125OC features dimmable capabilities and utilizes energy-efficient LED technology, making it an eco-friendly choice for homeowners and businesses alike. Its easy installation process makes it accessible for anyone looking to upgrade their lighting without extensive renovations.

In conclusion, the Inova USO56, LHF97125, SL150, BT200, and SL125OC each bring unique features and technologies to the lighting market, addressing the diverse needs of users across different sectors. With a commitment to energy efficiency, durability, and smart technology, Inova continues to push the boundaries of lighting innovation.
Top Page Image Contents