Heath Zenith SH-9250-BZ, SH-9250-WH manual Operation, Manual Mode

Operation

Mode: On-Time: Works: Day Night

MANUAL MODE

Test	5 Sec	x	x
Auto	1, 5, or 20 min.		x
Manual	Until Dawn*		x

*resets to Auto Mode at dawn.

RANGE

Turn Range control to the desired	RANGE
	MAX
setting.		B
		O
		O
		S
	MIN	T
TEST MODE

Manual Mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual Mode only works with the ON-TIME switch in the 1, 5, or 20 minute position.

1 Second OFF

then...

... back on.

Slide the ON-TIME switch to	O
TEST and turn the Range control
	TEST 1 5 20
to the center of its adjustment.

AUTO MODE

Put the ON-TIME switch in the 1, ON TIME

5, or 20 minute position.

TEST 1 5 20

	TEST	Move ON-TIME Switch
		to 1, 5, or 20 minutes
	AUTO		Flip light switch
			off for one second
			then back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time, the control will be in the AUTO mode.

-12- 598-1341-00