Elation Professional 575B manual Time information Current time, Total Run Time, Total Lamp Time

Design Spot 575B™

9.2 Information:

9.2.1.Time information

Current time

This function displays the running time of the fixture from the last power on. The display shows “XXXX”, where “XXXX” represents the number of hours the fixture has been running. This counter is automatically reset after every power-on.

Total Run Time

This function tracks the total running time of the fixture from the very first start-up. Where “XXXX ”represents the total number of running hours. This time is none destructive and will remain in the fixtures memory indefinitely.

Total Lamp Time

This function tracks the total number of lamp running hours. Where “XXXX” represents the number of hours the lamp has been running. This counter should be reset after every lamp change.

Lamp off time

This function displays the running time of the lamp from the last power on. The display shows “XXXX”, where “XXXX” represents the number of minutes the lamp has been running since it was last struck. This counter is automatically reset after every power-on.

Clear lamp time

This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at every lamp replacement. This procedure tracks the lamp running time so the lamp can be replaced at the end of it’s recommended duty cycle.

•Select “Clear lamp time” in the system menu.

•The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.

•Press enter to confirm.

•Press the Mode/Esc-button to return to the main menu.

©Elation Professional, Los Angeles CA. 25 Design Spot 575B™