Design Spot 575B™
9.2.2.Temp. Info.
Base Temp – This function will display the base temperature of the fixture.
Head Temp – This function will display the head temperature of the fixture.
9.2.3.Software version
This function will display the current operating software version of the fixture.
•Select “Software Version” in the system menu.
•Press enter to confirm.
•The LCD will read
•Use the UP and DOWN buttons to toggle through the software version of different IC’s.
•Press the
9.3 Lamp Control:
9.3.1. Lamp on/off
With this function you can switch the lamp on or off via the Control Board.
•Select "Lamp on/off" by turning the LCD controls.
•Press the LCD controls, the display shows “ON” or “OFF”.
•Turn the LCD controls to select “ON” if you wish to strike the lamp or “OFF” in order to switch it off.
•Press “ENTER” to confirm.
•Press the
9.3.2. Automatic Lamp On
With this function you can select if the lamp will be switched on when switching the power on. Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you don’t.
9.3.3. Lamp on via external DMX controller
With this function you can select if you can switch the lamp on via an external controller. Select “ON” by turning the LCD controls if you wish to enable this function or “OFF” if you
©Elation Professional, Los Angeles CA. | 26 | Design Spot 575B™ |