Elation Professional 575B manual Music Control submenu select Alone

Page 35

Design Spot 575B™

“Music Control” submenu select “Alone”

11.2Master-Slave Operation (Auto Program or Music Control): This function allows

up to 16 fixtures to be linked together to provide a synchronized light show without the use of a controller. Only use this when linking several Design Spot 575B together for use without a controller. Any fixture can act as a “Master or a “Slave.”

•Using XLR DMX cables, daisy chain your fixtures together via the XLR connectors. Remember the Male XLR connector is the input and the Female XLR connector is the output. The first fixture in the chain (master) will use the female XLR connector only - The last fixture in the chain will use the male XLR connector only. For longer cable runs we suggest a terminator at the last fixture.

•For the unit functioning as the “Master” unit follow the same procedures listed in the previous Stand-Alone section.

•For the “Slave” units, access the “Set To Slave” settings in the “Function Mode” menu and assign each slave fixture a designation (Slave 1, Slave 2,

Slave 3…etc).

11.3Universal DMX Control: This function allows you to use a universal DMX-512 controller such as the Elation® Show Designer 2™ or Elation® Show Designer 3™ to control head movement, the color wheel, the shutter (strobe), and all other DMX traits. A DMX controller allows you to create unique programs tailored to your individual needs. The Design Spot 575B™ uses 15 DMX channels. See page 41 for detailed description of the DMX traits. To control your fixture in DMX mode, follow the set-up procedures on pages 17-19 as well as the set-up specifications that are included with your DMX controller. Use the controller’s faders to control the various DMX fixture traits. This will allow you to create your own programs.

•Follow the instruction on page 32 to set the DMX address.

•Be sure to use a terminator on the last fixture, especially for longer cable runs (more than a 100 feet).

•For help operating in DMX mode consult the manual that was included with your DMX controller.

©Elation Professional, Los Angeles CA.

35

Design Spot 575B™

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Design Spot 575B Design Spot 575B Elation Professional, Los Angeles CA Contents General Information Design Spot 575B Never open this fixture while in use Safety Instructions Design Spot 575B Features General Guidelines Installation Procedure Lamp Installation InstructionsSafety Regulations Lamp Optimization Design Spot 575B Mounting Mounting and InstallationClamp Mounting Mounting pointsSecuring the Design Spot 575B Understanding DMX DMX-512 control connection Fixture DMX addressing DMX-512 connection with DMX terminatorDesign Spot 575B PAN…… Fixture MenuPAN…… PAN =XXX XX~XX Music control Slave settingMenu Functions Auto ProgramLamp off time Time information Current timeTotal Run Time Total Lamp TimeAutomatic Lamp On Temp. InfoSoftware version Lamp on/offLamp on at temp Status settingLamp off via external DMX controller Lamp Off if no DMXDesign Spot 575B Design Spot 575B Effect Adjust User Mode DMX Addressing Controller Settings Operation Music Control submenu select Alone Building Scenes Working with BUILT-IN ProgramsMemory Statistics Building Scenes from an External DMX Controller Playing a Program Editing ProgramsTilt Movement 8bit DMX Channel TraitsPAN Movement 8bit Pan Fine 16bitRotating gobo index, rotating gobo rotation Color WheelColor Wheel Fine Rotating gobos, cont. rotationFocus Fine Fixed gobo indexing FineFacet rotating prism, Prism / Gobo macros FocusIris Lamp on/off, reset, internal programsDimmer intensity Fine Dimmer intensityFuse Replacement Tilt Er Error CodesPan Er Prism Rotation Er Color ErRotation gobo Er Gobo Rotation ErIris Er Focus ErCleaning and Maintenance Year Limited Warranty Design Spot 575B Photometric Data Gobos Dimensional Drawings Circuit Schematic Gobos Technical SpecificationsDesign Spot 575B Elation Professional
Top Page Image Contents