Elation Professional 575B manual Editing Programs, Playing a Program

Page 38

Design Spot 575B™

-Once you reach your desired bank press the ENTER button and use the UP and DOWN button to reach “Input by Outside”

-Next, select a scene on your DMX console and press the ENTER button on the fixture. The scene should then be stored to the fixtures internal memory

EPROM.

-Follow the next section to build a program with your scenes.

Step 2 – Editing Programs.

The control will store a maximum of 10 programs. A program can store one or a maximum of 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the

10 available programs. Follow the procedure below to build an internal program:

•Access the main menu and toggle to “Edit Programs” which is menu function 8.

•Then tap the “ENTER” button and toggle to “Program 1” menu function 8-2-1.

•When you get to the “Program 1” function tap the “ENTER” button. The screen will then change to Edit Steps 01, this will be menu function 8-2-1-1. Use the “UP” and “DOWN” buttons to toggle through the scenes created in “Step 1.” Press the “ENTER” button to add a scene to the program. Tapping the “Enter” button will automatically lock the selected scene into the programs’ memory. Repeat the process until all the desired scenes have been added to the program. Each program can store a maximum of 64 scenes.

•To test the program access “Program Test” in the “Program Edit” menu function.

Step 3 – Playing a Program

To initiate a program follow the procedure below:

•Access the main menu and use the “Up” and “Down” to toggle to “Function Mode” and tap the “Enter” button.

•In the next screen select “Auto Program” and tap the “Enter” button.

•There are now two selections, “Master” and “Alone.” Select “Master” when running multiple fixtures in a master/slave configuration. See section 11.2 “Master/ Slave Operation” on page 36 for proper set-up instructions. Select “Alone” when running a single fixture or when multiple fixtures in stand-alone mode. See section 11.1 “Stand-Alone Operation” on page 34 for proper set-up instructions.

©Elation Professional, Los Angeles CA.

38

Design Spot 575B™

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Design Spot 575B Design Spot 575B Elation Professional, Los Angeles CA Contents General Information Design Spot 575B Never open this fixture while in use Safety Instructions Design Spot 575B Features General Guidelines Installation Procedure Lamp Installation InstructionsSafety Regulations Lamp Optimization Design Spot 575B Mounting and Installation MountingMounting points Clamp MountingSecuring the Design Spot 575B Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminator Fixture DMX addressingDesign Spot 575B Fixture Menu PAN……PAN…… PAN =XXX XX~XX Auto Program Slave settingMenu Functions Music controlTotal Lamp Time Time information Current timeTotal Run Time Lamp off timeLamp on/off Temp. InfoSoftware version Automatic Lamp OnLamp Off if no DMX Status settingLamp off via external DMX controller Lamp on at tempDesign Spot 575B Design Spot 575B Effect Adjust User Mode DMX Addressing Controller Settings Operation Music Control submenu select Alone Building Scenes Working with BUILT-IN ProgramsMemory Statistics Building Scenes from an External DMX Controller Editing Programs Playing a ProgramPan Fine 16bit DMX Channel TraitsPAN Movement 8bit Tilt Movement 8bitRotating gobos, cont. rotation Color WheelColor Wheel Fine Rotating gobo index, rotating gobo rotationFocus Fixed gobo indexing FineFacet rotating prism, Prism / Gobo macros Focus FineFine Dimmer intensity Lamp on/off, reset, internal programsDimmer intensity IrisFuse Replacement Tilt Er Error CodesPan Er Gobo Rotation Er Color ErRotation gobo Er Prism Rotation ErFocus Er Iris ErCleaning and Maintenance Year Limited Warranty Design Spot 575B Photometric Data Gobos Dimensional Drawings Circuit Schematic Technical Specifications GobosDesign Spot 575B Elation Professional
Top Page Image Contents