Elation Professional 575B manual General Guidelines

Page 10

Design Spot 575B™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be exposed to extreme heat, moisture or dust. The minimum distance between the fixture and a wall or flat surface should be at least 0.5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended environment always be sure to use mounting hardware no less than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of the fixture.

When using the quick release “Omega” cam-lock system, be sure the four quick lock fasteners are locked in the quick lock holes correctly.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture, most damages are the result of operations by nonprofessionals.

If possible, please use the original packaging to transport the fixture in for service.

©Elation Professional, Los Angeles CA.

10

Design Spot 575B™

Image 10

Contents Design Spot 575B Design Spot 575B Elation Professional, Los Angeles CA Contents General Information Design Spot 575B Never open this fixture while in use Safety Instructions Design Spot 575B Features General Guidelines Safety Regulations Lamp Installation InstructionsInstallation Procedure Lamp Optimization Design Spot 575B Mounting and Installation MountingMounting points Clamp MountingSecuring the Design Spot 575B Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminator Fixture DMX addressingDesign Spot 575B Fixture Menu PAN……PAN…… PAN =XXX XX~XX Auto Program Slave settingMenu Functions Music controlTotal Lamp Time Time information Current timeTotal Run Time Lamp off timeLamp on/off Temp. InfoSoftware version Automatic Lamp OnLamp Off if no DMX Status settingLamp off via external DMX controller Lamp on at tempDesign Spot 575B Design Spot 575B Effect Adjust User Mode DMX Addressing Controller Settings Operation Music Control submenu select Alone Memory Statistics Working with BUILT-IN ProgramsBuilding Scenes Building Scenes from an External DMX Controller Editing Programs Playing a ProgramPan Fine 16bit DMX Channel TraitsPAN Movement 8bit Tilt Movement 8bitRotating gobos, cont. rotation Color WheelColor Wheel Fine Rotating gobo index, rotating gobo rotationFocus Fixed gobo indexing FineFacet rotating prism, Prism / Gobo macros Focus FineFine Dimmer intensity Lamp on/off, reset, internal programsDimmer intensity IrisFuse Replacement Pan Er Error CodesTilt Er Gobo Rotation Er Color ErRotation gobo Er Prism Rotation ErFocus Er Iris ErCleaning and Maintenance Year Limited Warranty Design Spot 575B Photometric Data Gobos Dimensional Drawings Circuit Schematic Technical Specifications GobosDesign Spot 575B Elation Professional