Installing the Fence
Components and Hardware Needed: | Qty |
Jointer Bed Assembly with Fence Support | ....... 1 |
Fence | 1 |
Fence Bracket Assembly | 1 |
Fence Tilting Handle | 1 |
Cap Screws | 4 |
Lock Washers 8mm | 4 |
Hex Wrench 6mm | 1 |
To install the fence:
1.Use the four cap screws and washers to attach the fence to the fence bracket assem- bly, as shown in Figure 12.
Bracket
Assembly
Cap
Screws
Fence
Figure 12. Attaching the fence to the fence
bracket assembly.
2.Slide the fence bracket assembly over and onto the dovetails of the support and locking plate as shown in Figure 13.
Fence |
Bracket |
Assembly |
Fence Support |
Dovetails |
Figure 13. Sliding the fence bracket onto the
fence support dovetails.
G0612 6" Jointer
3.Slide the fence forward until it contacts the cutterhead guard and the cutterhead guard completely covers the cutterhead as shown in Figure 14.
Fence |
|
|
| Cutterhead | |
|
| |
|
| Guard |
| ||
|
|
|
Jointer
Tables
Figure 14. Fence postitioned over the jointer
tables.
Fence Tilting Handle
Install the fence tilting handle by screwing the handle shaft into the bracket assembly as shown in Figure 15.
Outward
Stop
Bracket |
|
|
| Fence Tilting | |
Assembly |
| |
| Handle Shaft | |
|
| |
|