Multiquip MVC98D2 manual Basic Engine, Engine Controls and Components

Page 15

BASIC ENGINE

9

34

1

2

10

5

11

7

8

6

Figure 3. Engine Controls and Components

The engine shown above is a YANMAR L48V6 engine (Figure 3). The engine must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s engine manual for instructions and details of operation and servicing. Each component is described below:

1.Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

2.

Fuel Tank – Capacity is 2.5 quarts (2.4 liters) of diesel

 

fuel.

3.

Air Cleaner – Prevents dirt and other debris from entering

 

the fuel system. Remove wing-nut on top of air filter

 

cannister to gain access to filter element.

4.

Muffler – Used to reduce noise and emissions.

5. Recoil Starting Handle (pull rope) – Type of engine starting method.

WARNING

Add fuel to the tank only when the engine is stopped and has cooled down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue has been completely wiped up and the area surrounding the engine is dry.

7.Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is low. DO NOT over fill.

NOTICE

Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8.Oil Drain Plug – Unscrew plug to drain oil from engine crankcase. Dispose of oil in a safe manner.

9.Decompression Lever– Press down before starting engine.To prevent damage to engine, DO NOT use for any other purpose.

WARNING

Engine components can generate extreme heat.To prevent burns, DONOTtouch these areas while the engine is running or immediatelyafteroperating.NEVERoperate the engine with the muffler removed.

10.Fuel Cock– Controls the flow of diesel fuel to the carburetor. Must be in the ON position when starting and running the engine.

6. Recoil Starter– Manual-starting method. Pull the starter 11. Speed Control Lever– Regulates engine speed. grip until resistance is felt, then pull briskly and smoothly.

MVC98D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #1 (1/12/11) — PAGE 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model MVC98D2 Proposition 65 Warning Engine exhaust and some of itsPage Table of Contents Ordering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationGeneral Safety Compactor Safety Fuel Safety Transporting Safety MVC98D2 Reversible Plate Compactor Dimensions DimensionsSpecifications Compactor SpecificationsGeneral Information Water flow from the water tank to the water tube Counter weightsComponents Splash plateEngine Controls and Components Basic EngineInstalling the Steering Handle SetupEngine Oil Check TemperatureInspection Before StartingVibrator Oil Check Belt CheckOperation Starting the EngineOperation OPERATION/PREPARATION for LONG-TERM Storage Normal Shut-Down ProcedureMaintenance Inspection and Maintenance ServiceTablesDaily Service Replacing theV-belt Engine Oil ReplacementAir Filter Cleaning Checking and the V-BeltReplacing the Clutch Checking and Replacing the Clutch Checking the ClutchEngine Troubleshooting TroubleshootingPlate Compactor Troubleshooting Explanation of Code in Remarks Column Sample Parts ListTo 3 Units Suggested Spare PartsAttenzione Atençaõ Precaucion Nameplate and Decals AssyPart Name QTY Remarks Body Assy Part Name Body Assy Throttle Wire 845 Vibration Assy Vibrating Case Water Tank Assy Sprinkling Pipe Transport Wheel Assy Part Name QTY. Remarks Cylinder Block Assy Cylinder Block Assy Cylinder Head Assy Cylinder Head AIR Cleaner Assy GASKET, AIR Cleaner Muffler Assy Muffler Gasket Crankshaft and Camshaft Assy Camshaft D Assy Piston Assy Includes Items W/# LUB. OIL Pump and Governor Assy LUB. OIL Pump Assy Cooling and Starting Device Assy Cylinder Cover Fuel Injection Pump Assy Fuel Injection Pump Body Fuel Tank and Fuel Line Assy Drain Plug TOOLS, Labels and Gasket SET Assy AIR Cooled Label Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

MVC98D2 specifications

The Multiquip MVC98D2 is a robust and versatile diesel-powered compactor designed for optimal performance in compacting soil and asphalt in various construction applications. Built with durability in mind, the MVC98D2 is a favored choice among contractors looking for reliable equipment that can withstand the rigors of job sites.

One of the standout features of the MVC98D2 is its advanced vibratory system. This compactor uses a unique dual eccentric weight system, which creates uniform vibration across the entire plate surface. This technology enhances compaction efficiency, allowing operators to achieve maximum density with fewer passes, thus saving time and reducing fuel consumption. The unit's compaction force is complemented by its heavy-duty plate design, which ensures superior performance even in challenging conditions.

Another important characteristic of the MVC98D2 is its powerful and fuel-efficient diesel engine. The model is typically equipped with a dependable engine that provides ample power while minimizing emissions. This makes it not only powerful but also environmentally conscious, adhering to regulatory standards in various regions. The engine is matched with an efficient transmission system that ensures smooth operation and optimal torque delivery.

In addition to its performance features, the MVC98D2 boasts a user-friendly design. The machine’s controls are intuitively arranged, allowing operators to easily and quickly familiarize themselves with its operation. The presence of an adjustable handle enhances comfort, improving operator ergonomics and reducing fatigue during extended use. Safety features, such as an emergency stop button, are also incorporated to enhance workplace safety.

The compact size and weight of the MVC98D2 allow for easy transportation and maneuverability on job sites, making it an excellent choice for both large-scale projects and smaller, confined spaces. The unit is designed to handle a variety of applications including backfill, trenching, and asphalt work, contributing to its versatility across numerous construction needs.

Overall, the Multiquip MVC98D2 stands out for its combination of power, efficiency, and user-friendly features. With its innovative technologies and robust design, it is engineered to deliver superior performance in the toughest conditions, making it a reliable tool for professionals in the construction industry.
Top Page Image Contents