Multiquip MVC98D2 manual Setup, Installing the Steering Handle

Page 16

SETUP

Compactor Instructions

The purpose of this section is to assist the user in the setting up of a NEW compactor. If your compactor is already assembled (vibration handle), then this section can be skipped.

Before packaging and shipping this MQ Mikasa Walk-Behind Plate compactor was run and tested at the factory. If there are problems, please let us know.

NOTICE

The new plate compactor cannot be put into service until the setup installation instructions are completed. These setup instructions only need to be performed at the time of unpacking a NEW compactor.

Steering Handle Assembly

The steering handle is not attached to the compactor’s lower base at the time of shipment. To attach the steeering handle to the lower base assembly perform the following:

1.Remove the bolts and washers (handle mounting hard- ware) from both sides of the plate compactor (Figure 4).

2.Position the anti-vibration handle over the compactor.

3.Align the holes at the bottom of the handle to the holes on the compactor (lower base) where the bolts and wash- ers where removed. Install and tighten the bolts and washers.

ANTI-VIBRATION

HANDLE

BASE PLATE

HANDLE MOUNTING

HARDWARE

Figure 4. Installing the Steering Handle

PAGE 16 — MVC98D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #1 (1/12/11)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model MVC98D2 Engine exhaust and some of its Proposition 65 WarningPage Table of Contents Parts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Compactor Safety Fuel Safety Transporting Safety Dimensions MVC98D2 Reversible Plate Compactor DimensionsSpecifications Specifications CompactorGeneral Information Counter weights ComponentsSplash plate Water flow from the water tank to the water tubeBasic Engine Engine Controls and ComponentsSetup Installing the Steering HandleTemperature InspectionBefore Starting Engine Oil CheckBelt Check Vibrator Oil CheckStarting the Engine OperationOperation Normal Shut-Down Procedure OPERATION/PREPARATION for LONG-TERM StorageInspection and Maintenance ServiceTables MaintenanceDaily Service Engine Oil Replacement Air Filter CleaningChecking and the V-Belt Replacing theV-beltChecking and Replacing the Clutch Checking the Clutch Replacing the ClutchTroubleshooting Engine TroubleshootingPlate Compactor Troubleshooting Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts To 3 UnitsNameplate and Decals Assy Attenzione Atençaõ PrecaucionPart Name QTY Remarks Body Assy Part Name Body Assy Throttle Wire 845 Vibration Assy Vibrating Case Water Tank Assy Sprinkling Pipe Transport Wheel Assy Part Name QTY. Remarks Cylinder Block Assy Cylinder Block Assy Cylinder Head Assy Cylinder Head AIR Cleaner Assy GASKET, AIR Cleaner Muffler Assy Muffler Gasket Crankshaft and Camshaft Assy Camshaft D Assy Piston Assy Includes Items W/# LUB. OIL Pump and Governor Assy LUB. OIL Pump Assy Cooling and Starting Device Assy Cylinder Cover Fuel Injection Pump Assy Fuel Injection Pump Body Fuel Tank and Fuel Line Assy Drain Plug TOOLS, Labels and Gasket SET Assy AIR Cooled Label Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

MVC98D2 specifications

The Multiquip MVC98D2 is a robust and versatile diesel-powered compactor designed for optimal performance in compacting soil and asphalt in various construction applications. Built with durability in mind, the MVC98D2 is a favored choice among contractors looking for reliable equipment that can withstand the rigors of job sites.

One of the standout features of the MVC98D2 is its advanced vibratory system. This compactor uses a unique dual eccentric weight system, which creates uniform vibration across the entire plate surface. This technology enhances compaction efficiency, allowing operators to achieve maximum density with fewer passes, thus saving time and reducing fuel consumption. The unit's compaction force is complemented by its heavy-duty plate design, which ensures superior performance even in challenging conditions.

Another important characteristic of the MVC98D2 is its powerful and fuel-efficient diesel engine. The model is typically equipped with a dependable engine that provides ample power while minimizing emissions. This makes it not only powerful but also environmentally conscious, adhering to regulatory standards in various regions. The engine is matched with an efficient transmission system that ensures smooth operation and optimal torque delivery.

In addition to its performance features, the MVC98D2 boasts a user-friendly design. The machine’s controls are intuitively arranged, allowing operators to easily and quickly familiarize themselves with its operation. The presence of an adjustable handle enhances comfort, improving operator ergonomics and reducing fatigue during extended use. Safety features, such as an emergency stop button, are also incorporated to enhance workplace safety.

The compact size and weight of the MVC98D2 allow for easy transportation and maneuverability on job sites, making it an excellent choice for both large-scale projects and smaller, confined spaces. The unit is designed to handle a variety of applications including backfill, trenching, and asphalt work, contributing to its versatility across numerous construction needs.

Overall, the Multiquip MVC98D2 stands out for its combination of power, efficiency, and user-friendly features. With its innovative technologies and robust design, it is engineered to deliver superior performance in the toughest conditions, making it a reliable tool for professionals in the construction industry.
Top Page Image Contents