INSPECTION
CAUTION
NEVER operate the unit in a confined area or enclosed area structure that does not provide ample free flow of air.
3.Insertandremovethedipstickwithoutscrewingitintothefiller neck. Check the oil level shown on the dipstick.
4.If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 4).Maximum oil capacity is 0.84 quarts (0.80 liters).
CAUTION
ALWAYS wear approved eye and hearing protection before operating the unit.
Before Starting:
1.Read safety instructions at the beginning of manual.
2.Remove dirt and dust, particularly in the engine cooling air inlet, carburetor and air cleaner.
3.Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.
4.Check carburetor for external dirt and dust. Clean with dry compressed air.
5.Check fastening nuts and bolts for tightness.
Engine Oil Check:
1.To check the engine oil level, place the compactor on secure level ground with the engine stopped.
2.Remove the filler dipstick from the engine oil filler hole (Figure 5) and wipe clean.
Figure 6. Engine Oil Dipstick (Oil Level)
Table 4. Oil Type
Season | Temperature | Oil Type |
|
|
|
Summer | 25°C or Higher | SAE |
|
|
|
Spring/Fall | 25°C~10°C | SAE |
|
|
|
Winter | 0°C or Lower | SAE |
|
|
|
DANGER
EXPLOSIVE FUEL!
Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel if the engine is hot or running.
Fuel Check:
1.Remove the fuel cap located on top of fuel tank.
2.Visually inspect to see if the fuel level is low. If fuel is low, replenish with clean diesel fuel.
3.Whenrefueling,besuretouseastrainerforfiltration. DONOT
Figure 5. Engine Oil Dipstick (Removal)
MVC98D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #1 (1/12/11) — PAGE 17