Multiquip MVC98D2 manual Belt Check, Vibrator Oil Check

Page 18

INSPECTION

V-Belt Check

CAUTION

NEVER attempt to check theV-belt with the engine running. Severe injury can occur of your hand (Figure 7) gets caught between theV-belt and the clutch.Always use safety gloves.

CLUTCH

PULLEY

VIBRATOR

PULLEY

Figure 7.V-Belt Hazard

1.To check the V-belt tension, remove the three bolts that secure the belt cover to the frame as shown in Figure 8.

REMOVE

VIBRATOR

REMOVE

V-BELT

2.The V-belt tension is proper if the V-belt bends 10 to 15 mm (Figure 9) when depressed with finger at midway between the clutch and vibration pulley shafts.

Figure 9. V-Belt Tension

3.A loose V-belt will decrease the power transmission output, causing reduced compaction and premature wear of the belt.

4.If the V-belt becomes worn or loose, replace it. See maintenance section.

Vibrator Oil Check

1.Place the MVC98D2 plate compactor horizontally on a flat surface.Makesurethecompactorislevelwhencheckingthe oil in the vibrator assembly.

2.Check vibratoroillevelbyremoving theplug (vibrator oilgauge) asshowninFigure10. Theoillevelshouldbeuptotheoilplug. Thevibratorholds 140cc(approximately4oz.).IMPORTANT, if oil is required, replace using only SAE10W-30 motor oil.

Figure 10.Vibrator Oil Plug

V-BELT COVER

Figure 8.V-Belt Cover Removal

PAGE 18 — MVC98D2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #1 (1/12/11)

Image 18

Contents Model MVC98D2 Engine exhaust and some of its Proposition 65 WarningPage Table of Contents Parts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Compactor Safety Fuel Safety Transporting Safety Dimensions MVC98D2 Reversible Plate Compactor DimensionsSpecifications Specifications CompactorGeneral Information Splash plate Counter weightsComponents Water flow from the water tank to the water tube Basic Engine Engine Controls and ComponentsSetup Installing the Steering HandleBefore Starting TemperatureInspection Engine Oil CheckBelt Check Vibrator Oil CheckOperation Starting the EngineOperation Normal Shut-Down Procedure OPERATION/PREPARATION for LONG-TERM StorageMaintenance Inspection and Maintenance ServiceTablesDaily Service Checking and the V-Belt Engine Oil ReplacementAir Filter Cleaning Replacing theV-beltChecking and Replacing the Clutch Checking the Clutch Replacing the ClutchTroubleshooting Engine TroubleshootingPlate Compactor Troubleshooting Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts To 3 UnitsNameplate and Decals Assy Attenzione Atençaõ PrecaucionPart Name QTY Remarks Body Assy Part Name Body Assy Throttle Wire 845 Vibration Assy Vibrating Case Water Tank Assy Sprinkling Pipe Transport Wheel Assy Part Name QTY. Remarks Cylinder Block Assy Cylinder Block Assy Cylinder Head Assy Cylinder Head AIR Cleaner Assy GASKET, AIR Cleaner Muffler Assy Muffler Gasket Crankshaft and Camshaft Assy Camshaft D Assy Piston Assy Includes Items W/# LUB. OIL Pump and Governor Assy LUB. OIL Pump Assy Cooling and Starting Device Assy Cylinder Cover Fuel Injection Pump Assy Fuel Injection Pump Body Fuel Tank and Fuel Line Assy Drain Plug TOOLS, Labels and Gasket SET Assy AIR Cooled Label Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help