Maintenance

BM 2609140358 12-05 12/6/05 3:28 PM Page 17

clearance hole in the first piece allows the screw head to pull the pieces tightly together.

RUNNING NUTS AND BOLTS

Variable speed control must be used with caution for driving nuts and bolts with socket

set attachments. The technique is to start slowly, increasing speed as the nut or bolt runs down. Set the nut or bolt snugly by slowing the tool to a stop. If this procedure is not followed, the tool will have a tendency to torque or twist in your hands when the nut or bolt seats.

Service

!WARNING NO USER SERVICEABLE PARTS INSIDE. Preventive

maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recom- mend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICEMEN: Disconnect tool and/or charger from power source before servicing.

BATTERIES

Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance or significantly shorter running time between charges then it is time to replace the battery pack. Failure to do so can cause the tool to operate improperly or damage the charger.

Long term battery storage should be in the discharged state. Battery packs last longer and re-charge better when they are stored discharged. Remember to fully re- charge battery packs before using after prolonged storage.

TOOL LUBRICATION

Your Bosch tool has been properly lubricated and is ready for use.

CARBON BRUSHES

The brushes and commutator in your tool have been engineered for many hours of dependable service.

If your tool runs sporadically, loses power, makes unusual noises or runs at a reduced speed, check the brushes. To continue using the tool in this condition will permanently damage your tool.

Check both brushes. Usually the brushes will not wear out simultaneously. If one brush is worn out, replace both brushes.

To check brushes: Disconnect battery pack from tool. Rotate brush cap at the rear part of housing counter-clockwise with a coin or screwdriver and remove cap (Fig. 14).

FIG. 14

BRUSH

CAP

Lift out the brushes; note which way they face, so that the brushes can be returned to their original position. New brushes can also be inserted turned 180º. Clean the brush holder openings with compressed air or a clean cloth and replace the brushes and brush covers.

After replacing brushes the tool should be run at no-load and run it freely at full speed for 2 minutes before using the tool. This will allow the brushes to “seat” properly and will give you more hours of life from each set of brushes.

Only genuine Bosch replacement brushes specially designed for your tool should be used.

D.C. MOTORS

The motor in your tool has been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend it be examined every six months. Only a genuine Bosch replacement motor specially designed for your tool should be used.

-17-

22612, 23609, 23618, 22618, 22614 specifications

Bosch is renowned for its innovation and quality in power tools, and the Bosch Power Tools series, particularly the models 23614, 23612, 22614, 22618, and 23618, showcases this commitment to excellence. Each model brings unique features and technologies that cater to a variety of construction and woodworking needs.

The Bosch 23614 is a robust tool designed for high-performance cutting and drilling tasks. It boasts a powerful motor that provides exceptional torque and speed, enabling users to complete projects efficiently. The user-friendly design includes an ergonomic grip for comfort during prolonged use, significantly reducing fatigue.

Similarly, the Bosch 23612 emphasizes precision and control. This model is equipped with advanced electronic speed control, allowing users to adjust the speed settings according to the material being worked on. This versatility makes it ideal for both heavy-duty applications and delicate tasks, making it an essential addition to any toolkit.

The Bosch 22614 showcases a compact design without compromising power. This model is particularly useful for tight spaces where larger tools cannot fit. Its lightweight construction, coupled with heavy-duty performance, ensures that users can maneuver easily while maintaining optimal cutting capabilities.

Moving on to the Bosch 22618, this model stands out for its battery technology. It features Bosch’s innovative lithium-ion battery that provides extended runtime and shorter recharge times. This efficiency makes the 22618 an excellent choice for professionals who require mobility and dependability on the job site, ensuring that the tool is ready when they are.

Finally, the Bosch 23618 further revolutionizes the user experience by integrating smart technology. This model is equipped with Bluetooth connectivity, allowing users to monitor battery performance and charging status through an app. This level of technological sophistication ensures that users are well-informed, allowing them to maintain productivity without interruptions.

In conclusion, the Bosch Power Tools 23614, 23612, 22614, 22618, and 23618 exemplify cutting-edge technology and user-centric design. With features that enhance performance, comfort, and connectivity, these tools are perfect for both professionals and DIY enthusiasts, proving that Bosch continues to lead the way in the power tools industry. Whether it is high torque, electronic speed control, compact designs, or smart technology, these models meet the diverse needs of their users, making them indispensable in any tool collection.