Removing or Installing the Jointer

REMOVING OR INSTALLING THE JOINTER

CAUTION :

Always be sure that the tool is switched off and unplugged before removing or installing the jointer.

The jointer can be easily removed from the auto-planer. You can carry it by yourself.

1.Removing the jointer

Loosen the right and left knobs. Pull the jointer toward you as shown in the figure. The jointer can be removed.

When the jointer is removed, the pulley cover will close automatically. If you I lock the pulley cover in the open posi- tion for some reason, be sure to close it by pushing the release button before operating the auto-planer. Never operate the auto-planer with the pulley cover locked in the open position.

2.Installing the jointer

Open the pulley cover until it will be locked. Align the line on the pulley with the pointer on the side cover (L) .

-Knob

Side cover (L)

/--		Pulley cover
/--	,-Pointer
/	= I	' Line

\L' \\\	...	Pulley
-	...