Movement and transport of planer-jointer

When moving the tool, hold it as shown in the figure. When transporting it by vehicle, secure with a rope or other substantial means to prevent tipping or movement.

Positioning the planer-jointer

Locate the tool in a well lit and level place where you can maintain good footing and balance. Bolt it to the workbench using the bolt holes provided in the base.

When locating it without bolting, use the stays provided to help maintain its stability. Remove the two bolts which secure the stays. Extend the stays by one bolt hole and secure them using the bolts.

Installing the crank handle

Install the crank handle using the socket wrench provided.

Switch action

CAUTION :

Before plugging in the tool, always be sure that the tool is switched off.

To start the tool, insert the key and press the ON side of the switch. To stop it, press the OFF side.

CAUTION :

When not using the tool, remove the key and store it in a secure place. This prevents unauthorized operation.