Loosen the clamp screws which secure I s the fence. Remove the fence. Align the
line on the coupling with the pointer on
the frame of the jointer.Coup1ing
Line
Align the two shafts of the jointer with the mating holes in the auto-planer. Push the jointer toward the auto-planer until the frame of the jointer contacts that of the auto- planer. Make sure the jointer is correctly installed on the auto-planer by viewing the contact portion through the notch. Tighten the knobs to secure the jointer. Re-install the fence and tighten the clamp screws to secure the fence.
r ‘lamp Screw
Mating
Knob
| | See this contact portion 2 |
Knob -/ | | through notch. |
-Shaft | of jointer |
