Milwaukee 5314-21 Work Area Safety Power Tool USE and Care, Electrical Safety, Personal Safety

Page 2

GENERAL SAFETY RULES — FOR ALL POWER TOOLS

WARNING!

READ ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-opearted (cordless) power tool.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY

POWER TOOL USE AND CARE

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce per- sonal injuries.

11.Avoid accidental starting. Ensure the switch is in the off- position before plugging in. Carrying tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

12.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.

15.If devices are provided for the connection of dust extrac- tion and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-re-

16.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

17.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source and/or the bat- tery pack from the power tool before making any adjust- ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the tool acci- dentally.

19.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tools or these instructions to operate power tools. Power tools are danger- ous in the hands of untrained users.

20.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

21.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

22.Use the power tool, accessories and tool bits etc., in accor- dance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE

23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

lated hazards. page 2

Image 2
Contents 2 HEAVY-DUTY Rotary Hammers Personal Safety Work Area Safety Power Tool USE and CareElectrical Safety ServiceSpecific Safety Rules Functional DescriptionGrounding Extension CordsTool Assembly Installing Bits and Chisels Fig Spline Drive System Cat. NoOperation Using LHS Rotary Percussion Core Bits Fig Mortar Cutting Chisels Seam Tools Chiseling and ChippingBushing Tools Bull PointsFive Year Tool Limited Warranty MaintenanceAccessories RepairsSécurité Individuelle Conservercesinstructions Sécurité DU Lieu DE TravailSécurité Électrique UTILISATIONETENTRETIENDEL’OUTILÉLECTRIQUERègles DE Sécurité Particulières Description FonctionnelleCordons DE Rallonge Calibres minimaux recommandés pour les Cordons de rallongeMise À LA Terre Avertissement Directives pour l’emploi des cordons de rallongeMontage DE Loutil Avertissement Positionnement de la poignée latérale FigManiement Utilisation de carottiers percutants Fig Utilisation des carottiers LHS à percussion et rotation FigAvertissement Ciseau à mortier outil à joint Cisellement et burinageBoucharde Ciseau à pointe robusteGarantie Limitée DE L’OUTIL DE Cinq ANS Maintenance AvertissementAccessoires Avertissement RéparationsSeguridad Personal GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Eléctrica USO Y Cuidado DE LAS Herramientas EléctricasCat Volts Golpes por Brocas Cortadores Barren Ca~ Reglas Especificas DE SeguridadDescripción Funcional Rpm Minuto Carburo De corazon AnclasGuías para el uso de cables de extensión Tierra ¡ADVERTENCIAExtensiónes Eléctricas Ensambaje DE LA Herramienta ¡ADVERTENCIA Cómo ajustar la posición de la mango lateral FigOperacion Page Page Cinceles con punta Cincelado y corteMartelinas Cinceles en fríoGarantía Limitada DE Cinco Años Mantenimiento ¡ADVERTENCIAAccesorios ¡ADVERTENCIA Mantenimiento de las herramientasSawdust

5314-21 specifications

The Milwaukee 5314-21 is a versatile and powerful tool designed to meet the demanding needs of professionals in construction and renovation projects. This rotary hammer drill combines innovative technology with robust construction, making it an essential addition to any toolkit.

One of the standout features of the Milwaukee 5314-21 is its high-performance motor, which delivers up to 7.0 amps of power. This allows the tool to handle tough drilling tasks with relative ease, making it suitable for a wide range of applications, including concrete, masonry, and even wood. Its impressive drilling capacity of up to 1-1/8 inches in concrete means that users can tackle larger projects without needing to switch tools.

The tool is equipped with an SDS-plus chuck system, which ensures quick and easy bit changes without the need for additional tools. This feature enhances productivity, especially for those who need to switch between different types of bits frequently during a job. Furthermore, the rotary hammer mode can be engaged for efficient drilling in hard materials, while the hammer-only mode is ideal for demolishing tasks.

Another essential characteristic of the Milwaukee 5314-21 is its ergonomic design. The rubber overmold provides a comfortable grip, reducing fatigue during prolonged use. Additionally, the lightweight design of the hammer itself ensures that users can work longer without feeling weighed down.

Safety is a top priority with the Milwaukee 5314-21, which features a two-finger trigger for added control and an electronic reverse for easy bit removal. A depth gauge is included to provide precise drilling depths, ensuring accuracy for various projects.

Overall, the Milwaukee 5314-21 stands out due to its combination of power, versatility, and user-focused design. It excels in both professional and DIY environments, ensuring reliability and efficiency. Whether you are a seasoned contractor or a passionate DIY enthusiast, this rotary hammer drill is engineered to meet a variety of needs while delivering exceptional performance.