Milwaukee 5314-21 Tool Assembly, Installing Bits and Chisels Fig Spline Drive System Cat. No

Page 5

TOOL ASSEMBLY

WARNING!

To reduce the risk of injury, always unplug tool before attaching or removing accessories or making adjustments. Use only specifically recommended accessories. Others may be hazardous.

WARNING!

To reduce the risk of injury, always use a side handle when using this tool. Always brace or hold securely.

Adjusting the Side Handle (Fig. 1)

Fig. 1

Side handle

1.Loosen the side handle slightly by unscrewing it counter- clockwise.

2.Rotate the side handle to the required angle.

3.Tighten the side handle securely.

Installing Bits and Chisels (Fig. 2)

SDS Max Drive System (Cat. No. 5314-21)

The 5314-21 Rotary Hammer uses SDS max drill bits and hammer steel chisels.

Fig. 2

1.Insert the bit or chisel into the nose of the tool.

2.Rotate bit slowly until it aligns with the locking mechanism.

3.Push bit into tool until it locks.

4.Check to see that bit is locked by tugging on it.

5.To remove bits and chisels, pull bit release collar (1) toward the rear of tool and remove bit.

NOTE: Use caution when handling hot bits and chisels.

Installing Bits and Chisels (Fig. 3)

Spline Drive System (Cat. No. 5318-21)

The 5318-21 Rotary Hammer uses carbide bits with spline shanks and hammer steel chisels with round hex shanks.

Fig. 3

1

Rotary bit with spline shank

Chisel with round hex shank

1.Insert the bit or chisel into the nose of the tool.

If you are using a rotary bit, make sure that the splines on the shank engage with the splines inside the nose of the tool.

If you are using a chisel, make sure that the notch in the shank faces up (Fig. 3).

2.Push bit into tool until it locks.

3.Check to see that bit is locked by tugging on it.

4.To remove bits and chisels, pull bit release collar (1) toward the rear of tool and remove bit.

NOTE: Use caution when handling hot bits and chisels.

1

Bit with SDS max shank

page 5

Image 5
Contents 2 HEAVY-DUTY Rotary Hammers Electrical Safety Work Area Safety Power Tool USE and CarePersonal Safety ServiceFunctional Description Specific Safety RulesExtension Cords GroundingInstalling Bits and Chisels Fig Spline Drive System Cat. No Tool AssemblyOperation Using LHS Rotary Percussion Core Bits Fig Bushing Tools Chiseling and ChippingMortar Cutting Chisels Seam Tools Bull PointsAccessories MaintenanceFive Year Tool Limited Warranty RepairsSécurité Électrique Conservercesinstructions Sécurité DU Lieu DE TravailSécurité Individuelle UTILISATIONETENTRETIENDEL’OUTILÉLECTRIQUEDescription Fonctionnelle Règles DE Sécurité ParticulièresMise À LA Terre Avertissement Calibres minimaux recommandés pour les Cordons de rallongeCordons DE Rallonge Directives pour l’emploi des cordons de rallongePositionnement de la poignée latérale Fig Montage DE Loutil AvertissementManiement Utilisation des carottiers LHS à percussion et rotation Fig Utilisation de carottiers percutants FigAvertissement Boucharde Cisellement et burinageCiseau à mortier outil à joint Ciseau à pointe robusteAccessoires Avertissement Maintenance AvertissementGarantie Limitée DE L’OUTIL DE Cinq ANS RéparationsSeguridad Eléctrica GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Personal USO Y Cuidado DE LAS Herramientas EléctricasDescripción Funcional Reglas Especificas DE SeguridadCat Volts Golpes por Brocas Cortadores Barren Ca~ Rpm Minuto Carburo De corazon AnclasGuías para el uso de cables de extensión Tierra ¡ADVERTENCIAExtensiónes Eléctricas Cómo ajustar la posición de la mango lateral Fig Ensambaje DE LA Herramienta ¡ADVERTENCIAOperacion Page Page Martelinas Cincelado y corteCinceles con punta Cinceles en fríoAccesorios ¡ADVERTENCIA Mantenimiento ¡ADVERTENCIAGarantía Limitada DE Cinco Años Mantenimiento de las herramientasSawdust

5314-21 specifications

The Milwaukee 5314-21 is a versatile and powerful tool designed to meet the demanding needs of professionals in construction and renovation projects. This rotary hammer drill combines innovative technology with robust construction, making it an essential addition to any toolkit.

One of the standout features of the Milwaukee 5314-21 is its high-performance motor, which delivers up to 7.0 amps of power. This allows the tool to handle tough drilling tasks with relative ease, making it suitable for a wide range of applications, including concrete, masonry, and even wood. Its impressive drilling capacity of up to 1-1/8 inches in concrete means that users can tackle larger projects without needing to switch tools.

The tool is equipped with an SDS-plus chuck system, which ensures quick and easy bit changes without the need for additional tools. This feature enhances productivity, especially for those who need to switch between different types of bits frequently during a job. Furthermore, the rotary hammer mode can be engaged for efficient drilling in hard materials, while the hammer-only mode is ideal for demolishing tasks.

Another essential characteristic of the Milwaukee 5314-21 is its ergonomic design. The rubber overmold provides a comfortable grip, reducing fatigue during prolonged use. Additionally, the lightweight design of the hammer itself ensures that users can work longer without feeling weighed down.

Safety is a top priority with the Milwaukee 5314-21, which features a two-finger trigger for added control and an electronic reverse for easy bit removal. A depth gauge is included to provide precise drilling depths, ensuring accuracy for various projects.

Overall, the Milwaukee 5314-21 stands out due to its combination of power, versatility, and user-focused design. It excels in both professional and DIY environments, ensuring reliability and efficiency. Whether you are a seasoned contractor or a passionate DIY enthusiast, this rotary hammer drill is engineered to meet a variety of needs while delivering exceptional performance.