MAINTENANCE
Be sure to stop the operation and turn off the circuit breaker before performing any mainte- nance.
CLEANING THE FILTERS
The air filters should be cleaned every two weeks.
1 Turn off the unit.
2 Remove the filters.
1Lift the open panel.
2Push the air filters up slightly to unlock them.
3Pull the air filters down to remove them.
1 |
|
2 | 3 |
3 Take off the air purifying filters from the air filters.
4 Clean the filters.
Use a vacuum cleaner to remove dust. If the filters are dirty, wash them with warm water and a mild detergent. Dry filters in the shade before reinstalling.
5 Reinstall the air purifying filters.
6 Reinstall the filters.
1Reinstall the filters in the original positions.
2 Close the open panel.
2
1
CLEANING THE UNIT AND THE REMOTE CONTROL
•Wipe them with a soft cloth.
•Do not directly splash or pour water on them. It can cause electrical shock or equipment damage.
•Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER HEAT PUMP SEASON
1 Operate the unit in the SELF CLEAN operation to allow the mechanism to thoroughly dry.
2 Stop the operation and turn off the circuit breaker.
3 Clean the filters, then reinstall them.
MAINTENANCE BEFORE HEAT PUMP SEASON
1 Makedirty. sure that the air filters are not
2 Make sure that nothing obstructs the air inlet or outlet.
CHANGING THE AIR PURIFYING FILTER
The air purifying filters should be changed every 3 ~ 6 months
1 Remove the air filters.
2 Change the air purifying filters.
1Take off the old air purifying filters from the air filters.
2Set the new air purifying filters, under the filter stoppers located on the air filters.
Filter stopper
Air filter
Air purifying filter
3 Reinstall the air filters.
NOTE:
•The dirty air purifying filters are not washable for reuse. The new filters are available at your nearest dealer.
Disposal of Filters
Please dispose of replaced filters according to the local disposal laws and regulations.
AIR PURIFYING filter materials Filter:Polypropylene Frame:Polyester
14