PLASMACLUSTER OPERATION |
| SELF CLEAN OPERATION |
|
|
|
Plasmacluster ions released into the room will reduce some airborne mold and viruses.
1 During operation, press the PLASMACLUSTER button.
• The remote control will display “ | ”. |
•The blue PLASMACLUSTER lamp on the unit will light up.
1
TO CANCEL
Press the PLASMACLUSTER button again.
•The PLASMACLUSTER lamp on the unit will turn off.
NOTE:
•Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next time you turn on the unit.
•To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
•To perform Plasmacluster operation in FAN only mode, press the PLASMACLUSTER button when the unit is not operating.
The mode symbol of the remote control will go off and the fan speed cannot be set to AUTO.
SELF CLEAN operation using Plasmacluster ions helps to reduce the growth mold fungus and dry inside of the unit. It is recommended to utilize the operation at seasonal change over.
1 Press the SELF CLEAN button when the unit is not operating.
• The remote control displays “ | ”. |
•The blue PLASMACLUSTER lamp on the unit will light up.
•The unit will stop operation after 40 minutes.
1
TO CANCEL
Press the SELF CLEAN button.
•The blue PLASMACLUSTER lamp on the unit will turn off.
NOTE:
•You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF CLEAN operation.
•Mold fungus already in existence can not be eliminated by this operation.
12