Miller Electric OM-227 398D manual Threading Welding Wire Through Gun, For XR-Aluma-Pro Gun

4-9. Threading Welding Wire Through Gun

. Refer to Section 4-4for instructions on feeding wire through feeder.

For XR-Aluma-Pro Gun:

! Welding wire is electrically live when gun trigger is used to jog wire.

.Turn OFF coolant supply before threading wire through gun..

Lay gun cable out straight. Press Jog switch until about 6 in (152 mm) of wire is sticking out end of contact tip.

. Verify pressure adjustment on handle matches the wire type. See Section 5-2.

Cut off wire. Close and latch wire feeder door.

Tools Needed:

Ref. 804 544-B / 804 545-B

OM-227 398 Page 12