Miller Electric Blue Star 3500 manual Installation, Installing Welding Generator

SECTION 5 − INSTALLATION

5-1. Installing Welding Generator

Movement	Airflow Clearance
		18 in
		(460 mm)
	18 in	18 in
		(460 mm)
	(460 mm)
	18 in	18 in
	(460 mm)
		(460 mm)
Location
	OR
	install1 5/02 − 802 512-A / Ref. 151 556 / 158 936-A / 800 652-A / S-0854

5-2. Grounding Generator To Truck Or Trailer Frame

Y Always ground generator frame to vehicle frame to pre- vent electric shock and static

				electricity hazards.
			1	Metal Vehicle Frame
			2	Equipment Grounding
				Terminal
	2		3	Grounding Cable
			Use #10 AWG or larger insulated
		3
GND/PE			copper wire.
			Y If unit does not have GFCI
				receptacles, use GFCI-
				protected extension cord.

Electrically bond generator frame to vehicle frame by metal-to-metal contact.

1

install1 5/02* − Ref. 151 556 / S-0854

Return To Table Of Contents OM-498 Page 13