Miller Electric Big Blue 400 KX manual Weld, Power, And Engine Specifications

SECTION 4 − SPECIFICATIONS

4-1. Weld, Power, And Engine Specifications

			Maximum
Welding	Weld Output	Rated Welding	Open-	Generator Power	Engine	Fuel
Mode	Range	Output	Circuit	Rating		Capacity
			Voltage
	20 − 410 A	300 A, 32 Volts DC		Single-Phase,
				10 kVA/kW, 91/46 A,
CC/DC		60% Duty Cycle
				110/220 V AC,
		250 A, 30 Volts DC			Kubota 1505 EBG1
				60 Hz
		100% Duty cycle			Water-Cooled,	11.5 gal
			73		Four-Cylinder,
						(43.5 L)
				110/55 V AC Receptacles	20.2 HP Diesel Engine
		300 A, 29 Volts DC
CV/DC	14 − 40 V			5.3 kVA/kW, 48/96 A
		60% Duty Cycle		220 V AC Receptacles
		250 A, 26.5 Volts DC
				10.5 kVA/kW, 48 A
		100% Duty cycle

4-2. Dimensions, Weights, And Operating Angles

	Dimensions
	32 in (813 mm)
Height	35-3/4 in (908 mm)
	(to top of lift eye)
	26-1/4 in (667 mm)

G

Width	(mtg. brackets turned in)
	28-3/4 in (730 mm)
	(mtg. brackets turned out)
Depth	56 in (1422 mm)
A	56 in (1422 mm)
B	54 in (1372 mm)
		A
			B	C
C	52 in in (1321 mm)
D	2 in (51 mm)
E	26 in (660 mm)
F	7/8 in (22 mm)
G	27-3/4 in (705 mm)
H	9/16 in (14 mm) Dia.
	4 Holes

Weight	D
No fuel: 1040 lb (471 kg)
w/ fuel: 1139 lb (516 kg)
Lifting Eye Weight Rating
1500 lb (680 kg) Maximum

H

Front Panel End

F

E

YDo not exceed tilt angles or engine could be damaged or unit could tip.

YDo not move or operate unit where it could tip.

	30°
20°	30°
20°

OM-4423 Page 12