A WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
,& WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.
REMOVING THE WARNING LABEL
See Figure 2.
The spotlight has an attached paper warning label on the lens. Remove this warning label before use as shown in figure 2.
A WARNING: Do not allow familiarity with products to
make you careless. Remember that a careless fraction of a second is sufficient to inflict serious
injury.
A WARNING: Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
A WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
•To illuminate any areas requiring additional light
•To illuminate distant objects
PULLTABTO
REMOVE
Fig. 2
_ WARNING: The lens gets very hot during use. To reduce the risk of burns, do not touch hot lens. To reduce the risk of fire, keep away from combustible materials while in operation.
CAUTION: Operate in a well ventilated area. Do
not block vents. Keep them clear to allow proper ventilation.
This product will accept DieHardo 19.2 V
For complete charging and battery instructions, refer to the Operator's Manual for the battery packs and chargers listed in the General Safety Rules.
BATTERY PROTECTION FEATURES
DieHardo 19.2 V
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.