Grounding Instructions
To prevent electric shock
and death from incorrect grounding wire connection
Read and follow these instructions:
6.Repair or replace damaged or worn cord immediately.
110-120 V~ Grounded Tools: Tools
with Three Prong Plugs
Grounding
Pin
1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an
2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
3.Improper connection of the equipment- grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the
4.Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
5.Use only
have
REV 10e
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
7.This tool is intended for use on a circuit that has an outlet that looks like the one illustrated above in 125 V~
8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.
9.Do not use an adapter to connect this tool to a different outlet.
Shaper Safety Warnings
For Your Own Safety Read Instruction
Manual Before Operating Shaper
1.Wear eye protection.
2.Be sure keyed washer is directly under spindle nut and spindle nut is tight.
3.Feed work piece against rotation of cutter.
4.Do not use awkward hand positions.
5.Keep fingers away from revolving cutter
– use fixtures when necessary.
SKU 32650 | For technical questions, please call | Page 5 |