Freud Tools FT3000VCE General Safety Rules, Work Area, Electrical Safety, Personal Safety

Page 5

English

SAFETY

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock,fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS

GENERAL SAFETY RULES

1.Work Area

a)Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents which could result in personal injury.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust of fumes.

c)Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

2.Electrical Safety

a)Double Insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double Insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

b)Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

c)Do not expose power tools to rain. Do not use power tools in damp or wet locations. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never carry the tool by the cord or yank the cord to pull the plug from a receptacle. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

e)When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock.

3.Personal Safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not operate a tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Dress properly. Do not wear loose clothing or jewelry. Wear protective hair covering to contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors.

c)Avoid unintentional starting. Be sure switch is off before plugging in. Do not carry tools with your finger on the switch or plug in tools that have the switch turned on.

d)Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in any situation.

f)Use safety equipment. Always wear protective glasses. Also use a face or dust mask if cutting operation is dusty.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions FT3000VCE 31/4 HP RouterTable of Contents Table DES Matières Tabla DE Contenidos General Safety Rules SafetyElectrical Safety Personal SafetyTool Use and Care ServiceAdditional Safety Rules for Routers Double Insulation Functional Description Descriptions & SpecificationsDepth Adjustment Knob Symbols SpecificationsPrior to Operation Assembly & OperationEnglish Option Depth Stop Turret and Turret Stop Rod Adjusting Depth of CutDepth Adjustment Knob -Fig Turret Stop Positions Adjust Turret Rod to nearest scale number as shown below Operating Instructions Powering the Tool On and OffMounting Template Guides Variable Speed Control FT3000 Router Speed Dial SettingsEdge Cutting & Fig Cutting ApplicationsPlunge Cutting- & Fig Table MountingMaintenance Maintenance & InspectionService Locations AccessoriesAccessories ServiceNorth American Power Tool Warranty English Toupie 3-1/4 HP FT3000VCE Conserver CES Instructions Règles Générales DE Sécurité SécuritèAire de travail Règles de sécurité en matière d’alimentationRègles DE Sécurité Additionnelles Pour Toupie Utilisation et maintenance de l’outilDouble Isolation Description Fonctionnelle Descriptions ET SpécificationsSpécifications SymbolesAvant L’UTILISATION Assemblage ET UtilisationFrançais Les blessures corporelles ou d’endommager l’outil Tourelle de butée de profondeur et tige de butée Fig Réglage DE LA Profondeur DE CoupeMolette de réglage de la profondeur Fig Mise à zéro de la profondeur de coupe Tourelle à trois Positions de butéeFrançais Mise en marche et arrêt de l’outil Montage DES Guides Pour GabaritInstructions D’UTILISATION Diamètre du couteau Tr/min maximums Réglage de la vitesse de rotationCoupe des bordures et Fig Applications DE CoupeToupillage en plongée et Fig Montage SUR TableCordon d’alimentation Accessoires AccessoiresPoints DE Service Garantie Limitée DE Cinq ANS Garantie EN Amérique DU NordRebajadora FT3000VCE de 3-1/4 HP Area de trabajo Guarde Estas Instrucciones Reglas Generales DE SeguridadSeguridad Eléctrica Seguridad PersonalReglas DE Seguridad Adicionales Para Fresadoras Uso de la herramienta y cuidadoServicio Doble Insulación Eje Descripción DE FuncionesSímbolos EspecificácionesOpción Antes DE OperarInstalación Y Desmontaje DE LA Broca 2 Opciones Español Español Regulación DE LA Profundidad DE Corte Profundidad cero Graduación de la altura del motor aEspañol Encendido y apagado de la herramienta Montaje DE LAS Plantillas GuíaInstrucciones DE Operación RPM Máx Control de velocidad variableCorte de bordes Figs y Tipos DE CortesCortes con efecto émbolo Figs y Montaje EN MesaServício Mantenimiento & InspecciónAccesorios Ubicaciones DE ServícioPautas a Seguir Para LA Garantía DE Freud Tabla Garantíade ContenidosEspañol Freud America, Inc U.S. dial Canada dial

FT3000VCE specifications

The Freud Tools FT3000VCE is an exceptional plunge router designed for both amateur woodworkers and seasoned professionals. Known for its reliability and precision, this versatile power tool stands out in the crowded market of woodworking equipment, making it a favorite among DIY enthusiasts and contractors alike.

One of the main features of the FT3000VCE is its powerful 3.0 HP motor. This robust motor provides consistent power, ensuring smooth operation even in tough materials such as hardwoods and laminates. The variable speed control, adjustable from 8,000 to 21,000 RPM, allows users to match the routing speed to the task at hand, whether it’s intricate detail work or heavy stock removal.

Precision is paramount in woodworking, and Freud addresses this with its patented "Soft Start" technology. This feature gradually ramps up the motor speed to reduce sudden jolts, giving users better control and minimizing strain on both the router and the material. Additionally, the electronic feedback system ensures a stable RPM throughout the cut, maintaining performance despite varying load conditions.

The FT3000VCE is built with user comfort in mind. Its ergonomic design includes a balanced body with soft-grip handles, allowing for easier maneuverability and reduced operator fatigue during extended use. The inclusion of a precise depth adjustment system simplifies the process of setting cut depth, while the easy-to-read scale ensures accuracy.

Another noteworthy characteristic is the dual side handles that provide added stability and control, especially during complex routing tasks. The router also features a powerful integrated dust collection system, which helps to maintain a clean working environment by effectively capturing sawdust and debris.

For versatility, the Freud FT3000VCE offers a variety of base options including a fixed base, plunge base, and even a cam-lock system for quick changes between bases. This adaptability allows woodworkers to approach a wide range of projects, from edge profiling to mortising and hollowing.

In summary, the Freud Tools FT3000VCE combines power, precision, and comfort into a single reliable tool that can elevate any woodworking project. With its advanced technologies, ergonomic design, and versatile capabilities, it remains a top choice for those seeking a high-quality plunge router.
Top Page Image Contents