Cisco Systems 819G Installing the Power Switch Lock, Installing Power Cord Lock onto the Router

Chapter 2 Installing the Router

Installing the Router

Figure 2-12 Installing Power Cord Lock onto the Router

285517

Step 4 To remove the power cord lock, use your thumb and index fingers to squeeze ends of tabs while pulling away from the router. (See Figure 2-13.)

Figure 2-13 End of Tabs

285518

1

1

End of tabs

Installing the Power Switch Lock

The Cisco 819 ISRs have a power switch lock as an accessory. The power switch lock prevents unauthorized access to a tampered proof router (for example, router in a bus). For the complete list of Cisco 819 ISRs that support power switch lock, see Table 1-4.

This section describes how to install the power switch lock.

Step 1 Install the power switch lock by following the parts listed in Figure 2-14. All these parts are in the accessory kit in their own bag. The ring terminal does not have to be installed. Figure 2-15shows the power switch lock installed.

	Cisco 819 Integrated Services Router Hardware Installation Guide
OL-23125-02		2-15