C H A P T E R 2
Installing the Router
This chapter describes the equipment and the procedures for successfully installing the Cisco 819 ISR and contains the following sections:
•Equipment, Tools, and Connections, page
•Installing the Router, page
•Mounting the DC Power Supply, page
Note For compliance and safety information, see the Regulatory Compliance and Safety Information Roadmap that ships with the router and the Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning No
Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Warning Read the
Cisco 819 Integrated Services Router Hardware Installation Guide
|
| ||
|
|