Specifications, EC Declaration of Conformity

ENGLISH (Original instructions)

Explanation of general view

1-1. Shaft lock		6-3. Rubber pad		10-2. Insulating tip
2-1.	Lock button	7-1.	Lock nut wrench	10-3. Carbon brush
2-2.	Switch trigger	7-2.	Shaft lock	11-1.	Brush holder cap
3-1.	Speed adjusting dial	9-1.	Exhaust vent	11-2.	Screwdriver
6-1.	Lock nut	9-2.	Inhalation vent

6-2. Abrasive disc10-1. Commutator

SPECIFICATIONS

Model	SA7000C
Disc diameter	180 mm
Spindle thread	M14
No load speed (n0) / Rated speed (n)	0 - 1,500 / 4,000 (min-1)
Overall length	453 mm
Net weight	3.4 kg
Safety class	/II

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

ENE052-1

Intended use

The tool is intended for the sanding of large surface of wood, plastic and metal materials as well as painted surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

ENG102-2

For European countries only

Noise

The typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA) : 88 dB(A)

Sound power level (LWA) : 99 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG228-4

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745-2-3:

Work mode: disc sanding

Vibration emission (ah,SG) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

If the tool is used for other applications, the vibration emission value may be different.

ENG901-1

•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

•The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

ENH101-12

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):

Designation of Machine:

Angle Sander

Model No./ Type: SA7000C are of series production and

Conforms to the following European Directives: 98/37/EC until 28th December 2009 and then with 2006/42/EC from 29th December 2009

And are manufactured in accordance with the following standards or standardised documents:

EN60745

SA7000C specifications

The Makita SA7000C is an exceptional angle grinder designed to meet the demanding needs of professionals and DIY enthusiasts alike. Offering a combination of power, performance, and durability, the SA7000C stands out in a crowded market with its robust feature set and advanced technologies.

One of the most notable features of the SA7000C is its powerful 2000-watt motor, which generates high speed and torque, allowing users to tackle a wide range of grinding and cutting applications with ease. Whether you're working with metal, concrete, or masonry, the SA7000C delivers consistent and reliable performance.

The grinder offers variable speed control, ranging from 2,000 to 6,600 RPM, enabling users to select the optimal speed for different materials and tasks. This flexibility is particularly advantageous in a variety of settings, from metal fabrication to construction projects. The soft start feature further enhances the user experience, as it minimizes the risk of kickback and allows for smoother operation when beginning a task.

Ergonomics play a key role in the design of the SA7000C, which features a rubberized grip that provides enhanced comfort and control. The grinder's lightweight design, weighing in at approximately 5.1 kg, ensures ease of handling for extended periods without causing excessive fatigue. Additionally, the tool's side handle can be positioned on either side, accommodating left-handed and right-handed users.

Durability is a hallmark of the Makita SA7000C, featuring a double-insulated body that protects against dust and debris. Its labyrinth construction seals the motor and bearings, significantly extending the tool’s lifespan. The grinder is designed for heavy-duty applications, making it suitable for professionals in construction, metalworking, and fabricating industries.

Regarding safety, the SA7000C incorporates a gear housing that allows for easy access to the gear for maintenance. The protective cover can be adjusted without the need for tools, providing convenience and promoting user safety. Moreover, the spindle lock feature ensures quick and easy wheel changes.

In summary, the Makita SA7000C is a powerful and versatile angle grinder that excels in performance, ergonomics, and durability. Its advanced features and user-centric design make it a valuable tool for professionals and hobbyists looking for reliability and efficiency in their grinding and cutting tasks. Whether for industrial use or personal projects, the SA7000C stands as a testament to Makita's commitment to engineering excellence.