Handwheel |
|
Components and Hardware Needed: | Qty |
Handwheel Handle | 1 |
Handwheel | 1 |
Cap Screw | 1 |
Flat Washer 5mm | 1 |
To install the handwheel: |
|
1.Thread the handwheel handle into the handwheel and tighten it.
2.Slide the handwheel over the shaft, making sure the shaft pin (Figure 13) inserts into the slots in the handwheel.
Shaft Pin
Slots
Figure 13. Installing handwheel.
3.Secure the handwheel with an M5-.8 x 10 cap screw and 5mm flat washer.
Dust Port and Bag | |
Components and Hardware Needed: | Qty |
Dust Port | 1 |
Dust Bag | 1 |
Dust Hose Clamp | 1 |
Phillips Head Screw | 1 |
To install the dust port: |
|
1.Slide the dust port over the fan housing and tighten the included Phillips head screw (Figure 14).
Fan Housing
Dust Port
Figure 14. Installing dust port.
2.Slide the dust hose clamp over the dust bag, insert the bag and clamp over the dust port (Figure 15), and secure with the clamp handle. DO NOT overtighten the clamping adjustment or it may break!
Clamp | Dust Port |
|
Dust Bag
| Figure 15. Installing dust bag and clamp. |
G0458 18" Open End Belt/Drum Sander |