Beginning Assembly
This section will cover the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.
Your safety is important! Please follow the warnings below during this entire section:
Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
!could occur if you con- nect your machine to theSerious personal injury
power source before you have completed the assembly process. DO
NOT connect the machine to the power source until instructed to do so.
Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.
Cabinet Assembly
The Model G0529 Sander mounts on a sturdy cabinet stand.
To assemble the cabinet stand:
1.Connect all four panels together with the 5Ú16"
Figure 3. Assembled panels.
2.Using the 5Ú16" flat head screws, 5Ú16" washers and nuts, install the four rubber feet as shown in Figure 4.
Figure 4. Installing rubber feet.
|
|
|
|
|
|
|
|
|
|
|
|
G0529 Oscillating Spindle & Disc Sander | |||