Additional Safety Instructions For The
Oscillating Spindle & Disc Sander
¥READ THIS MANUAL. This manual con- tains proper operating instructions for this machine.
¥DO NOT jam the workpiece against the sanding surfaces. Firmly grasp the work- piece in both hands and ease it against the spindle/disc using light pressure.
¥DO NOT wear loose clothing while operat- ing this machine. Roll up or button sleeves at the cuff.
¥DO NOT place hands near, or in contact with, sanding surfaces during operation.
¥GRIP THE WORKPIECE WITH BOTH HANDS.
¥PERFORM machine inspections and maintenance service promptly when called for.
¥NEVER leave the machine running unat- tended.
¥REPLACE sanding discs and sleeves when they become worn.
¥NEVER sand more than one piece of stock at a time.
¥ALWAYS inspect board stock for nails, staples, knots, and other imperfections that could be dislodged and thrown from the machine during sanding operations.
¥NEVER operate the sander without an adequate dust collection system in place and running.
•NEVER sand tapered or pointed stock with the point facing the feed direction.
¥DISCONNECT THE MACHINE FROM THE POWER SOURCE before changing the sanding disc or sleeve.
¥TEST RUN THE MACHINE before starting any work.
No list of safety guidelines can be com- plete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to follow guidelines could result in serious personal injury, damage to equipment or poor work results.
Always wear a respira- tor when operating the Model G0529. Using this machine produces saw- dust which may cause allergic reactions or res- piratory problems.
G0529 Oscillating Spindle & Disc Sander |